EAO Push Button Switch
- RS 제품 번호:
- 248-5239
- Distrelec 제품 번호:
- 135-56-800
- 제조사 부품 번호:
- 31-425.036
- 제조업체:
- EAO
대량 구매 할인 기용 가능
가격 개당**
₩36,108.80
47 <재고있음> 5-9영업일내 홍콩 발송*
* 배송 날짜는 선택한 수량과 배송 주소에 따라 달라질 수 있습니다.
수량 | 한팩당 |
---|---|
1 - 14 | ₩36,108.80 |
15 + | ₩35,035.00 |
**다른 단위에 대한 가격 표시
- RS 제품 번호:
- 248-5239
- Distrelec 제품 번호:
- 135-56-800
- 제조사 부품 번호:
- 31-425.036
- 제조업체:
- EAO
- COO (Country of Origin):
- CH
Illuminated Push Button Switch - EAO 31 Series
The EAO 31 series of illuminated push button switches are suitable for use in many Human Machine Interface (HMI) panel mounting applications including Process Control, Panel Building, Machinery and Instrumentation. The illuminated push button switches are available in a choice of round (18mm diameter), square (18x18mm) or rectangular (18x24mm) bezels with snap action or low level switching elements with momentary or maintained switching actions.
The snap action switching element is a self-cleaning, double-break, snap action system with solder terminals, while the low level switching element is designed for switching low power loads in electronic circuits ranging from 10μA at 100μV up to 100mA at 42Vac/dc, termination is via universal terminals that allow either direct soldering or PCB mounting.
Illumination for the EAO 31 series of push button switches is via a T1 midget groove filament lamp or single chip LED with a voltage of between 6 and 48V. For supply voltages above 48V, it is necessary to use an external series resistor.
All EAO 31 series of illuminated push button switches require a 16mm panel cut out and are suitable for panels with a thickness of between 1.5 and 6mm. They have a long life, short rebound time and a stable contact resistance.
The snap action switching element is a self-cleaning, double-break, snap action system with solder terminals, while the low level switching element is designed for switching low power loads in electronic circuits ranging from 10μA at 100μV up to 100mA at 42Vac/dc, termination is via universal terminals that allow either direct soldering or PCB mounting.
Illumination for the EAO 31 series of push button switches is via a T1 midget groove filament lamp or single chip LED with a voltage of between 6 and 48V. For supply voltages above 48V, it is necessary to use an external series resistor.
All EAO 31 series of illuminated push button switches require a 16mm panel cut out and are suitable for panels with a thickness of between 1.5 and 6mm. They have a long life, short rebound time and a stable contact resistance.
Various configurations available including low level or snap action elements, momentary or maintained switching actions and normally closed or normally open contacts
Raised button profile
Self-extinguishing switch and actuator housing material
Class II compliant
Electric strength 2500Vac 50Hz for 1 minute between all terminals and earth, as per IEC 60512-2-11
Raised button profile
Self-extinguishing switch and actuator housing material
Class II compliant
Electric strength 2500Vac 50Hz for 1 minute between all terminals and earth, as per IEC 60512-2-11
Note
To make a complete illuminated switch you will need the switch, a lens and a filament lamp or LED.
For the EAO 31 series of indicators see stock number 248-5368 typically.
For the EAO 31 series of lenses see stock numbers 749-2611 or 248-5425 or 248-5374 typically.
For the EAO 31 series tool kit see stock number 248-5481.
For a suitable filament lamp see stock number 655-9211 typically.
For a suitable white single chip LED see stock number 225-997 typically.
For the EAO 31 series of indicators see stock number 248-5368 typically.
For the EAO 31 series of lenses see stock numbers 749-2611 or 248-5425 or 248-5374 typically.
For the EAO 31 series tool kit see stock number 248-5481.
For a suitable filament lamp see stock number 655-9211 typically.
For a suitable white single chip LED see stock number 225-997 typically.
Standards
EN 61058
EAO Push Button Switch, Momentary Switch Action, NO Contact Configuration - 31 Series - 31-425.036
Looking for a reliable way to control your industrial equipment? Choose this push button switch from EAO. As it's a momentary switch, it only activates your machinery when pressed, making it a good choice for controlling short-term processes. The illuminated head makes it easy to determine its operating status at a glance. Its gold-plated silver contacts are highly conductive and resistant to corrosion for effective switching.
Features & Benefits
• IP40 rating means it's touchproof and protected against tools and wires larger than 1mm in size
• Supply voltage of 42V makes it suitable for use in low-power systems
• Supply voltage of 42V makes it suitable for use in low-power systems
Applications
• Process control
• Panel building
• Industrial operations
• Electronic devices
• Domestic appliances
• Panel building
• Industrial operations
• Electronic devices
• Domestic appliances
How does momentary actuation work?
When the button is pressed down, the contacts close to complete the electrical circuit and activate a linked device. Once you release the button, the contacts open and break the circuit.
Why should I use a temporary switch for certain equipment?
Some applications, such as industrial shredders, need manual operation and constant supervision. This push button switch helps ensure that dangerous machinery is only activated when operating conditions are safe.
속성 | 값 |
---|---|
Mounting Type | PCB |