Drummond MTL10 Test Lamp and Proving Unit Safety Kit

Voltage level indicator & proving unit safety kit comprising:

MTL10 Drummond Test Lamp

Bright LED indication of voltage between 50V and 500V AC/DC
Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight
Meets the UK Health and Safety Executive guidance notes on electrician’s test lamp (GS38)
Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V

PD440 Proving Unit:

Essential to check the MTL10 for correct operation prior to working on electrical circuits
The PD440 is a 440Vac proving unit, designed to enable voltage indicators to be fully checked, in compliance with Health & Safety recommendations
Operating Temperature: -10°C to +40°C at max 70% RH
Battery: 6 x LR6 / MN1500 1.5V alkaline batteries or equivalent
Dimensions: 143 x 84 x 50mm
Weight: 400g approx including battery
6 AA batteries (required, see stock no. 591-225)

Supplied with

Handy carry case, right angled probe tip, two straight tips and instructions

Mains Voltage Indicators - Contact

모두 선택	제품 정보	값
	브랜드	John Drummond
	Test Current Rating	3.5mA
	Output Voltage	50 V ac/dc, 100 V ac/dc, 200 V ac/dc, 400 V ac/dc
	Power Source	Mains
	Dimensions	213 x 112 x 72mm
	Weight	320g
	Height	72mm
	Length	213mm
	Maximum Operating Temperature	+55°C
	Minimum Operating Temperature	-10°C
	Width	112mm

	모두 선택
	브랜드 John Drummond
	Test Current Rating 3.5mA
	Output Voltage 50 V ac/dc, 100 V ac/dc, 200 V ac/dc, 400 V ac/dc
	Power Source Mains
	Dimensions 213 x 112 x 72mm
	Weight 320g
	Height 72mm
	Length 213mm
	Maximum Operating Temperature +55°C
	Minimum Operating Temperature -10°C
	Width 112mm

John Drummond MTL10 Voltage Indicator & Proving Unit Kit 3.5mA 50 V ac/dc, 100 V ac/dc, 200 V ac/dc, 400 V ac/dc, Kit

대체품

Drummond MTL10 Test Lamp and Proving Unit Safety Kit

Supplied with

관련된 링크들