Resistive Touch LCD Modules with PICASO Processor, 4D Systems
4D Systems range of resistive touch modules with PICASO processor are available in three sizes: 2.4 inch, 2.8 inch and 3.2 inch. The on-board PICASO graphics controller is driven by Extensible Virtual Engine (EVE) and benefits from built-in features such as full colour image, animation, icon and video display. You also have access to Workshop4 IDE for software development and coding using the 4DGL graphics language.
Features & Benefits:
2.4 inch LCD Module — 9028640 •Dimensions: 45 mm x 63 mm x 16 mm •Viewing area: 36.72 mm x 48.96 mm •240 x 320 pixel resolution •13 GPIO pins •Up to 65k colours •4-Wire resistive touch panel •14 KB flash memory •14 KB SRAM •2 asynchronous hardware serial ports •I2C serial interface •8 x 16-bit timers •microSD memory card socket •FAT16 DOS compatible file access •Lithium polymer battery support •PWM audio pin •Audio amplifier •30-pin header for I/O expansion and daughter board plug-in •Suitable for a 4 V to 5.5 V power supply •4 corner plates with 2.7 mm holes for mounting
2.8 inch LCD Module — 9028644 •Dimensions: 52.1 mm x 72 mm x 16 mm •Viewing area: 43.2 mm x 57.6 mm •240 x 320 pixel resolution •13 GPIO pins •Up to 65k colours •4-Wire resistive touch panel •14 KB flash memory •14 KB SRAM •2 asynchronous hardware serial ports •I2C serial interface •8 x 16-bit timers •microSD memory card socket •FAT16 DOS compatible file access •Lithium polymer battery support •PWM audio pin •Audio amplifier •30-pin header for I/O expansion and daughter board plug-in •Suitable for a 4 V to 5.5 V power supply •4 corner plates with 2.7 mm holes for mounting
3.2 inch LCD Module — 9028653 •Dimensions: 56.3 mm x 80.5 mm x 15.9 mm •Viewing area: 48.60 x 64.80 mm •240 x 320 pixel resolution •13 GPIO pins •Up to 65k colours •4-Wire resistive touch panel •14 KB flash memory •14 KB SRAM •2 asynchronous hardware serial ports •I2C serial interface •8 x 16-bit timers •microSD memory card socket •FAT16 DOS compatible file access •Lithium polymer battery support •PWM audio pin •Audio amplifier •30-pin header for I/O expansion and daughter board plug-in •Suitable for a 4 V to 5.5 V power supply •4 corner plates with 2.7 mm holes for mounting
Note
For new designs the 4D Systems gen4 range of LCD displays should be considered, including: • gen4-uLCD-24DT (RS part 1257941) • gen4-uLCD-28DT (RS part 1257942) • gen4-uLCD-32DT (RS part 1257943)
