Klauke, Hand Crimp Tool

모든 Crimp Tools 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩282,770.80

Add to Basket
수량 선택 또는 입력
재고있음
  • 14 개 단위 배송 준비 완료
  • 추가로 2026년 2월 23일 부터 6 개 단위 배송
  • 추가로 2026년 3월 09일 부터 6 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 4₩282,770.80
5 - 24₩254,495.60
25 +₩249,400.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
398-3043
제조사 부품 번호:
K2
제조업체:
Klauke
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Klauke

Operation Type

Hand

Product Type

Crimp Tool

Standards/Approvals

DIN 46230, DIN 46234

COO (Country of Origin):
DE

Klauke® K2 Hand Crimp Tool


The Klauke K2 Crimp Tool is a high-quality hand tool designed for crimping terminals, bootlace ferrules in a cross-section from 0.75 mm² to 16 mm². The K2 has marked crimping indents for the different terminal sizes and a ratchet mechanism that ensures secure, high-quality crimps at every time.

Ergonomically designed handles guarantee safe and comfortable operation

Features and Benefits:

• Designed to work with a wide range of terminals and cables in a cross-section from 0.75mm² to 16mm²

• A ratchet mechanism that guarantees a high-quality, consistent results

• Ergonomically designed handles

• Compact size: only 325 mm of length

• Weight: 600g

Typical Applications:

• Maintenance & repair

• Electrical Installations

• Cable assemblies

FAQ’s:

What is the difference between un-insulated and insulated crimp tools?

Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

How do you maintain the product?

• Axles and other movable parts should be regularly lubricated.

• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.

• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

관련된 링크들