Honeywell Technologies HSCDRRV001PGSA3 Pressure SensorBoard 8 DIP

RS 제품 번호:: 211-9928
제조사 부품 번호:: HSCDRRV001PGSA3
제조업체:: Honeywell

Honeywell Technologies HSCDRRV001PGSA3 Pressure SensorBoard 8 DIP

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 unit)*

₩67,440.00

95 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 - 12	₩67,440.00
13 - 24	₩65,960.00
25 +	₩64,540.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 211-9928
제조사 부품 번호:: HSCDRRV001PGSA3
제조업체:: Honeywell

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Honeywell
	Product Type	Pressure Sensor
	Sensor Type	Piezoresistive Pressure Sensor
	Maximum Overload Pressure	69kPa
	Mount Type	Board
	Package Type	DIP
	Pin Count	8
	Minimum Supply Voltage	3.3V
	Maximum Operating Pressure	6.89 kPa
	Maximum Supply Voltage	5V
	Accuracy	±0.25 %
	Port Type	Dual Radial Barbed
	Maximum Operating Temperature	+85°C
	Height	13.75mm
	Series	HSC
	Length	10mm
	Width	13.3mm
	Standards/Approvals	ISO 9001
	Minimum Operating Pressure	0psi
	Minimum Operating Temperature	-20°C
	Automotive Standard	ISO 9001

	모두 선택
	브랜드 Honeywell
	Product Type Pressure Sensor
	Sensor Type Piezoresistive Pressure Sensor
	Maximum Overload Pressure 69kPa
	Mount Type Board
	Package Type DIP
	Pin Count 8
	Minimum Supply Voltage 3.3V
	Maximum Operating Pressure 6.89 kPa
	Maximum Supply Voltage 5V
	Accuracy ±0.25 %
	Port Type Dual Radial Barbed
	Maximum Operating Temperature +85°C
	Height 13.75mm
	Series HSC
	Length 10mm
	Width 13.3mm
	Standards/Approvals ISO 9001
	Minimum Operating Pressure 0psi
	Minimum Operating Temperature -20°C
	Automotive Standard ISO 9001

Datasheet - HSCDRRV001PGSA3

Honeywell HSC Series Gauge Pressure Sensor, 3.3V Minimum Supply Voltage, ±0.25% Accuracy - HSCDRRV001PGSA3

This gauge pressure sensor is a board-mounted device designed to measure pressure relative to ambient conditions in low-pressure gas and compatible liquid applications. It provides a calibrated, temperature-compensated output for direct Interface to electronic systems and is intended for use where Compact size and precision are required in instrument and control assemblies.

Features and Benefits:

• ±0.25% accuracy pressure sensor delivers tight measurement precision
• 3.3V board-mounted pressure sensor supports low-voltage systems
• Dual radial barbed port sensor simplifies tubing connections
• DIP package pressure transducer eases through-hole PCB integration
• Low-pressure gauge sensor 69kPa overload increases safety margin
• -20 to 85°C operating pressure sensor suits wide thermal range

Applications

• Suitable for ventilator and respiratory monitoring devices
• Ideal for HVAC filter-clog detection and VAV control
• Used with gas flow instrumentation and flow calibrators
• Can be used in oxygen concentrators and anaesthesia machines
• Used for indoor Air quality and barometry measurements

What media is compatible with the sensor?

It is intended for non-corrosive, non-ionic gases and select non-corrosive, non-ionic liquids for ranges above 40 mbar.

How is output stability maintained over temperature?

On-board ASIC provides calibration and temperature compensation for offset, sensitivity, non-linearity and updates calibrated values at up to 1 kHz analogue.

What electrical interfaces are available?

The device supports a ratiometric analogue output, digital variants offer SPI or I2C-compatible 14-bit output with minimum 12-bit resolution.

How does the sensor perform under long-term use?

The design minimises drift through industry-leading stability characteristics and specifies long-term stability over extended cycle life.

What packaging and approvals apply to the product?

The sensor is supplied in a DIP package with dual radial barbed ports and is manufactured to ISO 9001 standards.