Honeywell Technologies Pressure SensorBoard 6 DIP

RS 제품 번호:: 203-6349
Distrelec 제품 번호:: 301-59-419
제조사 부품 번호:: HSCDRRV001PDSA3
제조업체:: Honeywell Technologies

Honeywell Technologies Pressure SensorBoard 6 DIP

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 unit)*

₩68,400.00

24 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 - 12	₩68,400.00
13 - 24	₩67,040.00
25 +	₩65,700.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 203-6349
Distrelec 제품 번호:: 301-59-419
제조사 부품 번호:: HSCDRRV001PDSA3
제조업체:: Honeywell Technologies

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Honeywell Technologies
	Maximum Overload Pressure	68.9kPa
	Sensor Type	Piezoresistive Pressure Sensor
	Product Type	Pressure Sensor
	Mount Type	Board
	Package Type	DIP
	Pin Count	6
	Minimum Supply Voltage	3.3V
	Maximum Operating Pressure	6.8 kPa
	Port Type	Dual Radial Barbed
	Maximum Supply Voltage	5V
	Accuracy	±0.25 %
	Maximum Operating Temperature	+85°C
	Standards/Approvals	ISO 9001
	Length	10mm
	Height	13.75mm
	Series	HSC
	Width	13.3mm
	Minimum Operating Pressure	1psi
	Minimum Operating Temperature	-20°C
	Automotive Standard	ISO 9001

	모두 선택
	브랜드 Honeywell Technologies
	Maximum Overload Pressure 68.9kPa
	Sensor Type Piezoresistive Pressure Sensor
	Product Type Pressure Sensor
	Mount Type Board
	Package Type DIP
	Pin Count 6
	Minimum Supply Voltage 3.3V
	Maximum Operating Pressure 6.8 kPa
	Port Type Dual Radial Barbed
	Maximum Supply Voltage 5V
	Accuracy ±0.25 %
	Maximum Operating Temperature +85°C
	Standards/Approvals ISO 9001
	Length 10mm
	Height 13.75mm
	Series HSC
	Width 13.3mm
	Minimum Operating Pressure 1psi
	Minimum Operating Temperature -20°C
	Automotive Standard ISO 9001

Datasheet - HSCDRRV001PDatasheetA3

COO (Country of Origin):: CN

Honeywell HSC Series Differential Pressure Sensor, ±0.25% Accuracy, 3.3V Minimum Supply Voltage - HSCDRRV001PDSA3

This differential pressure sensor measures the pressure difference between two ports and provides a ratiometric analogue or digital output for use with non-corrosive, non-ionic gases. It is intended for board mounting and is temperature characterised for operation across typical industrial and medical conditions, offering fast update rates suitable for system-level monitoring and control.

Features and Benefits:

• ±0.25% accuracy reduces software correction needs
• Operates from a single 3.3V or 5V supply for flexibility
• Compensated over temperature to maintain output stability
• Low power consumption preserves battery life in portable systems
• Dual radial barbed port sensor simplifies tubing connections
• Calibrated on-board ASIC yields rapid, stable output updates

Applications

• Used for respiratory monitoring in ventilators and spirometers
• Suitable for HVAC filter clog detection and VAV control
• Ideal for gas flow instrumentation and flow calibrators
• Can be used for oxygen concentrator pressure sensing
• Used with anaesthesia machines and nebulisers in hospitals

What supply voltages will it accept?

It is characterised to operate from either 3.3V or 5V supply rails and is supplied as either a 3.3V or 5.0V device depending on the catalogue selection.

How does temperature affect performance?

The sensor is fully temperature compensated over the compensated range to limit offset and sensitivity drift and is characterised for operation from -20 to 85°C.

What media are compatible with the ports?

It is designed for non-corrosive, non-ionic gases, liquid-media options exist for Port 1 only on certain pressure ranges.

What outputs are available and how fast are they updated?

Outputs are available as ratiometric analogue or 14-bit digital (I2C or SPI compatible) with calibrated update rates around 1kHz analogue and 2kHz digital.

What mechanical package and pin count does it use?

The device is a board-mount DIP package with a 6-pin Interface for DIP versions and uses dual radial barbed ports for differential measurement.