Fluke G 1/4 RS232 Pressure Gauge, 114 mm, 340 bar

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Pressure Gauges 열람하기
현재 비가용
RS는 이 제품을 더 이상 판매하지 않습니다.
RS 제품 번호:
758-8910
Distrelec 제품 번호:
176-50-057
제조사 부품 번호:
FLUKE-700G30/APAC
제조업체:
Fluke
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Fluke

Product Type

Pressure Gauge

Maximum Pressure Measurement

340bar

Minimum Pressure Measurement

-0.97bar

Pressure Connection

1/4 inch NPT Male

Connection Size

G 1/4

Connection Type

1/4 in NPT Male

Accuracy

±0.05 %

Series

Fluke 700G

Interface Type

RS232

Case Material

Cast Zinc, Aluminium

Minimum Operating Temperature

-10°C

Dial Size

114mm

Maximum Operating Temperature

55°C

Standards/Approvals

ATEX, Class 1, CSA, Groups A-D, Div 2

제외

COO (Country of Origin):
CN

Fluke 700G Series Pressure Gauge, 114mm Dial Size, 340 Bar Maximum Pressure Measurement - Fluke-700G30


This pressure gauge provides precise pressure measurement for industrial systems and test benches, designed to operate across a wide span from slight vacuum to very high pressure. It connects directly to process lines via a 1/4 inch NPT male fitting and is suited to environments where certified safety approvals and rugged construction are required.

Features & Benefits


• ±0.05% accuracy gives highly precise process readings
• Calibrated unit enables immediate use without adjustment
• Maximum measure of 340 bar supports high-pressure systems
• Minimum reading of -0.97 bar permits near-vacuum monitoring
• ATEX and Class 1 approvals allow use in hazardous zones
• Cast zinc aluminium case provides robust environmental protection

**Applications**


• Suitable for hydraulic test rigs requiring high-pressure measurement
• Ideal for compressor system commissioning and verification
• Used for pressure monitoring in hazardous-area instrumentation panels
• Can be used for calibration benches where traceable accuracy is needed
• Used with maintenance tools for industrial pump diagnostics

What connection type does it require for installation?


It uses a 1/4 in NPT male threaded pressure connection compatible with standard NPT fittings.

How large is the display for easy reading?


The dial has a 114mm diameter to provide clear indication at a glance.

What materials are used for the enclosure to withstand workshop conditions?


The case is constructed from a cast zinc and aluminium combination for mechanical durability.

Are there approvals for use in explosive atmospheres and regulatory markets?


It carries ATEX classification Plus CSA approval suitable for Class 1, Groups A–D, Division 2 locations.

Note

The 700G gauges can be combined with the 7588920 (700PTPK) or 7588926 (700HTPK) pump kits, available separately, for a complete pressure testing solution for up to 600psi with the PTP-1 pneumatic pump and up to 10,000psi with the HTP-2 hydraulic pump. Up to 8493 pressure measurements can be logged to memory using 7588923 700G/TRACK logging software (available separately).

Approvals

CSA, ATEX

관련된 링크들