STMicroelectronics High Side, USB Power Power Switch IC 10-Pin, DFN10L
- RS 제품 번호:
- 240-0607P
- 제조사 부품 번호:
- STELPD01PUR
- 제조업체:
- STMicroelectronics
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal 10 units (supplied on a continuous strip)*
₩25,584.00
재고있음
- 추가로 2026년 5월 25일 부터 260 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 10 - 95 | ₩2,558.40 |
| 100 - 245 | ₩2,542.80 |
| 250 - 495 | ₩2,523.30 |
| 500 + | ₩2,503.80 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 240-0607P
- 제조사 부품 번호:
- STELPD01PUR
- 제조업체:
- STMicroelectronics
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | STMicroelectronics | |
| Power Switch Topology | High Side | |
| Power Switch Type | USB Power | |
| Product Type | Power Switch IC | |
| Switch On Resistance RdsOn | 50mΩ | |
| Interface Type | USB | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 4V | |
| Package Type | DFN10L | |
| Pin Count | 10 | |
| Maximum Supply Voltage | 18V | |
| Operating Current | 5A | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Length | 3.15mm | |
| Standards/Approvals | No | |
| Height | 1mm | |
| Automotive Standard | No | |
| Series | STELPD01 | |
| 모두 선택 | ||
|---|---|---|
브랜드 STMicroelectronics | ||
Power Switch Topology High Side | ||
Power Switch Type USB Power | ||
Product Type Power Switch IC | ||
Switch On Resistance RdsOn 50mΩ | ||
Interface Type USB | ||
Mount Type Surface | ||
Minimum Supply Voltage 4V | ||
Package Type DFN10L | ||
Pin Count 10 | ||
Maximum Supply Voltage 18V | ||
Operating Current 5A | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Length 3.15mm | ||
Standards/Approvals No | ||
Height 1mm | ||
Automotive Standard No | ||
Series STELPD01 | ||
The STMicroelectronics Electronic load switch for power line is an integrated electronic power switch for power rail protection applications. It is able to precisely detect and react to overcurrent and overvoltage conditions. When an overload condition occurs, the device goes into an open state, disconnecting the load from the power supply. An external power MOSFET can be driven to manage the power loss protection in case of fault condition. In case of overvoltage on the input, the device regulates the output to a preset 17.5 V value, Under voltage lockout prevents the load from malfunction, keeping the device off if the rail voltage is too low. The STELPD01 features an adjustable turn-on slew-rate, which is useful to keep the in rush current under control during start-up and hot-swap operations.
Wide input voltage range: 4 V to 18 V
17.5 V typical output overvoltage clamp
Absolute maximum voltage of 23.5 V
5 A maximum continuous current
Thermal protection
Input under voltage lockout
Low inrush current during start-up
Integrated 40 mΩ Power FET