STMicroelectronics IPS2050HTR 24High Side, High Side Power Switch IC

대량 구매 할인 기용 가능

Subtotal (1 pack of 2 units)*

₩17,559.20

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 364 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
한팩당*
2 - 8₩8,779.60₩17,559.20
10 - 98₩8,610.40₩17,220.80
100 - 248₩8,431.80₩16,863.60
250 - 498₩8,262.60₩16,525.20
500 +₩8,018.20₩16,036.40

* 참고 가격: 실제 구매가격과 다를 수 있습니다

포장 옵션
RS 제품 번호:
239-5528
제조사 부품 번호:
IPS2050HTR
제조업체:
STMicroelectronics
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

STMicroelectronics

Power Switch Topology

High Side

Power Switch Type

High Side

Switch On Resistance

50mΩ

Number of Channels

24

Maximum Operating Supply Voltage

60 V

Maximum Operating Current

5.6A

Number of Outputs

16

The STMicroelectronics IPS2050H and IPS2050H-32 are dual high-side switch ICs able to drive capacitive, resistive or inductive loads with one side connected to ground. The very low RDS-ON (≤ 50 mΩ up to TJ = 125 °C) makes the IC suitable for applications with up to 2.4 A / 5.6 A steady state operating current. Each output channel is independently protected against junction over-temperature events by a junction temperature sensor, and a further temperature sensor is included to monitor case temperature, so an overheated output channel can only be turned back ON when the case temperature returns below the reset temperature.

8 V to 60 V operating supply voltage range
Smart driving of capacitive load
Under-voltage lock-out
VCCover-voltage protection
Fast demagnetization of inductive loads
Per-channel overload and over-temperature protection
Case over-temperature protections
Ground disconnection protection

The embedded per-channel overload protection circuit monitors the output current and, on triggering of the activation threshold (IPK-X), starts modulating the impedance of the output switch to limit the output current to ILIM-X, for both IC and load protection. The IC diagnostics is based on two FAULT pins (current source), one for each channel. Each FAULT pin is activated by an overload or an over-temperature event on the related channel.

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.


관련된 링크들