The ON Semiconductor NCP11187A100PG integrates a peak current mode PWM controller employing mWSaver technology and a highly robust 800 V SJ MOSFET providing especially enhanced performance in flyback converters. The mWSaver technology reduces switching frequency and operating current of the controller at light−load condition, which helps avoid acoustic−noise problems. The device comes in a PDIP-7 package and, includes a high−voltage startup circuit, frequency−hopping function, slope compensation, constant output power limit, and highly reliable and various protections, which allows easy design, less BOM counts, smaller PCB size and designing cost−effective off−line power supply.

The device has an integrated 800 V super junction MOSFET
It has built−in high voltage start-up, soft-start, and slope compensation
The mWSaver technology provides industry’s Best-in-class standby power
The devices Switching frequency is 100 kHz

수량	한팩당	Per Tube*
3000 - 3000	₩2,526.72	₩7,579,596.00
6000 - 6000	₩2,475.96	₩7,428,444.00
9000 +	₩2,427.08	₩7,279,548.00

모두 선택	제품 정보	값
	브랜드	onsemi
	Number of Channels	1
	Maximum Operating Supply Voltage	-0.3 → 30 V
	Maximum Operating Current	3.3mA
	Number of Outputs	1
	Package Type	PDIP-7
	Pin Count	7

	모두 선택
	브랜드 onsemi
	Number of Channels 1
	Maximum Operating Supply Voltage -0.3 → 30 V
	Maximum Operating Current 3.3mA
	Number of Outputs 1
	Package Type PDIP-7
	Pin Count 7

onsemi NCP11187A100PG, 1 Power Switch IC 7-Pin, PDIP-7

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.

관련된 링크들