제조사부품번호

STMicroelectronics VND5T050AKTR-E High Side, High Side Power Switch IC 24-Pin, PowerSSO-24

RS 제품 번호:: 233-3119
제조사 부품 번호:: VND5T050AKTR-E
제조업체:: STMicroelectronics

STMicroelectronics VND5T050AKTR-E High Side, High Side Power Switch IC 24-Pin, PowerSSO-24

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩6,880.80

일시적 품절

2026년 2월 23일 부터 4,994 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 - 9	₩6,880.80
10 - 99	₩6,768.00
100 - 249	₩6,655.20
250 - 499	₩6,504.80
500 +	₩6,392.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 233-3119
제조사 부품 번호:: VND5T050AKTR-E
제조업체:: STMicroelectronics

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	STMicroelectronics
	Product Type	Power Switch IC
	Power Switch Type	High Side
	Power Switch Topology	High Side
	Number of Outputs	2
	Mount Type	Surface
	Package Type	PowerSSO-24
	Pin Count	24
	Maximum Supply Voltage	58V
	Maximum Operating Temperature	125°C
	Minimum Operating Temperature	-40°C
	Operating Current	34A
	Standards/Approvals	RoHS
	Automotive Standard	No

	모두 선택
	브랜드 STMicroelectronics
	Product Type Power Switch IC
	Power Switch Type High Side
	Power Switch Topology High Side
	Number of Outputs 2
	Mount Type Surface
	Package Type PowerSSO-24
	Pin Count 24
	Maximum Supply Voltage 58V
	Maximum Operating Temperature 125°C
	Minimum Operating Temperature -40°C
	Operating Current 34A
	Standards/Approvals RoHS
	Automotive Standard No

Datasheet - VND5T050AKTR-E

The STMicroelectronics VND5T050AK-E is a monolithic device made using STMicroelectronics®VIPower®technology, intended for driving resistive or inductive loads with one side connected to ground. Active VCCpin voltage clamp protects the device against low energy spikes. This device integrates an analog current sense which delivers a current proportional to the load current. Fault conditions such as overload, over temperature or short to VCCare reported via the current sense pin. Output current limitation protects the device in overload condition. The device will latch off in case of overload or thermal shutdown. The device is reset by a low level pass on the fault reset standby pin.

Very low standby current

3.0 V CMOS compatible input

Optimized electromagnetic emission

Very low electromagnetic susceptibility

Compliance with European directive 2002/95/EC

Fault reset standby pin (FR_Stby)

STMicroelectronics VND5T050AKTR-E High Side, High Side Power Switch IC 24-Pin, PowerSSO-24

관련된 링크들