Infineon EVAL-M1-05F804R 3 Phase Motor Drive for IRSM005-310MH CIPOS™ Nano power modules.
- RS 제품 번호:
- 248-9730
- 제조사 부품 번호:
- EVALM105F804RTOBO1
- 제조업체:
- Infineon
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩236,109.20
일시적 품절
- 2025년 12월 08일 부터 1 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 1 | ₩236,109.20 |
| 2 - 2 | ₩231,371.60 |
| 3 + | ₩224,434.40 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 248-9730
- 제조사 부품 번호:
- EVALM105F804RTOBO1
- 제조업체:
- Infineon
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Infineon | |
| Power Management Function | 3 Phase Motor Drive | |
| For Use With | IRSM005-310MH CIPOS™ Nano power modules. | |
| Kit Classification | Evaluation Board | |
| Kit Name | EVAL-M1-05F804R | |
| 모두 선택 | ||
|---|---|---|
브랜드 Infineon | ||
Power Management Function 3 Phase Motor Drive | ||
For Use With IRSM005-310MH CIPOS™ Nano power modules. | ||
Kit Classification Evaluation Board | ||
Kit Name EVAL-M1-05F804R | ||
The Infineon evaluation was developed to support customers during their first steps designing applications with IRSM005-800MH CIPOS™ nano power modules. As a part of iMOTION™ modular application design kit, EVAL-M1-05F804R is a power evaluation board from the modular application design kit including M1 connector, which is the iMOTION™ standard interface, and three CIPOS™ Nano 40 V half-bridge modules for motor drive applications. In combination with either EVAL-M1-101T or other control boards with M1 connector compatible, it features and demonstrates Infineons CIPOS™ Nano IPM technology and advanced Motion Control Engine (MCE 2.0) technology for motors drive over the full speed range.
Ready to use DC power stage to drive 3-phase motor
3 x CIPOS™ Nano IPM on board
Nominal input voltage 6 ∼ 30 Vdc
Maximum 240 W output power without heatsink
Maximum 10.2 A output current per phase
Over current protection
Over temperature protection
Test pads with hooks to attach standard oscilloscope probes
Standard MADK M1 20pin interface connector
3 x CIPOS™ Nano IPM on board
Nominal input voltage 6 ∼ 30 Vdc
Maximum 240 W output power without heatsink
Maximum 10.2 A output current per phase
Over current protection
Over temperature protection
Test pads with hooks to attach standard oscilloscope probes
Standard MADK M1 20pin interface connector
For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.
관련된 링크들
- Infineon EVAL-M1-05F310R 3 Phase Motor Drive for IRSM005-310MH CIPOS™ Nano power modules.
- Infineon EVAL-M1-36-44A Microcontroller for EVAL-M1-101T, IRSM836-044MA for Fans, Hair Dryers, Pumps
- Infineon EVAL-M1-CM610N3 3 Phase Motor Drive for CIPOS™ Mini IKCM10H60GA for EVAL-M1-101T
- Infineon EVALM13645ATOBO2 3 Phase Motor Drive for IRSM836-045MA for IRSM836-045MA
- Infineon EVAL-M1-05-65D 3 Phase Motor Drive for IRSM505-065DA2 for Systems based on 100-130V AC mains voltage
- Infineon EVAL-M1-IM523 BLDC Motor for EVAL-M1-IM523 for Motor Drive Applications
- Infineon EVAL-M1-IM241
- Infineon EVAL-M3-IM564 Motor Control for EVAL-M3-102T, IM564-X6D for PFC-integrated IPMs
