Infineon Evaluation Board for EiceDRIVER Half-Bridge Driver for 1ED3890MX12M for EV Charger, Motor Control &amp, Drives,

본 제품군 열람하기
대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩188,883.60

Add to Basket
수량 선택 또는 입력
제한된 재고
  • 3 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 1₩188,883.60
2 - 2₩185,123.60
3 +₩179,577.60

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
232-5726
제조사 부품 번호:
EVAL1ED3890MX12MTOBO1
제조업체:
Infineon
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Infineon

Power Management Function

Half-Bridge Driver

Product Type

Development Board

For Use With

EV Charger, Motor Control &amp, Drives, UPS

Kit Classification

Evaluation Board

Featured Device

1ED3890MX12M

Kit Name

Evaluation Board for EiceDRIVER

Standards/Approvals

RoHS

Evaluation board for EiceDRIVER™ X3 single-channel highly flexible isolated gate driver family


The EVAL-1ED3890MX12M is in half-bridge configuration with two gate driver ICs (1ED3890MX12M) to drive power switches such as IGBTs, MOSFETs and SiC MOSFETs. The switch type can be freely chosen. The board has a size of 85 x 85 x 15 mm without any power switch assembled.

The board is best suited to leverage the highly configurable X3 Digital (1ED38xx) family with its rich feature-set. Configuration is performed via I2C bus.

The evaluation board is recommended to be used with a companion microcontroller evaluation board EVAL-1ED38X0DCT to optimize the configuration process.

Summary of Features


  • I2C bus for parameter adjustment, state and fault feedback, ADC measurements and condition monitoring

  • Adjustable Clamp/Clamp driver/ADC pin

  • Two precise VCEsat detection (DESAT2) circuit with fault output, adjustable leading edge blanking time and individually adjustable trigger voltages, filter times

  • Two-level turn-off (TLTO) with adjustable slopes, plateau time and plateau level

  • Adjustable soft turn-off after desaturation detection

  • Adjustable hardware UVLO with hysteresis for IGBTs and MOSFETs on both VCC2 and VEE2 rails with active shutdown

  • ADC measurement of internal parameters: supply voltages and internal temperature

  • 40 V absolute maximum output supply voltage

  • ± 9 A typical sourcing and sinking gate current capability

  • High common-mode transient immunity CMTI = 200 kV/μs

  • Small space-saving DSO-16 fine-pitch package with large creepage distance ( >8 mm)

  • Gate driver safety certification according to UL 1577 and VDE 0884-11

    • Benefits


  • Enables fast design cycles due to low external component count and still offers adjustable DESAT with Soft-off functionality

  • Best-in-class DESAT accuracy: perfect for all applications requiring reliable short-circuit protection (including SiC MOSFET and IGBT7)

  • Enables predictive maintenance and rapid prototyping

  • The precise threshold and timings, combined with UL 1577 and VDE 0884-11 certification enable superior application safety

  • Perfect fit for all applications requiring a reliable DESAT protection, benefit from an active Miller clamp and prefer small PCB space requirements

    • 관련된 링크들