현재 비가용

죄송합니다. 언제 재입고될지 모릅니다.

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	STMicroelectronics
	Power Management Function	Solar Charger
	Product Type	Power Management Development Kit
	Kit Classification	Development Board
	Featured Device	SPV1040
	Kit Name	Up to 5 W Solar Battery Charger with Embedded MPPT Based on SPV1040
	Standards/Approvals	No

	모두 선택
	브랜드 STMicroelectronics
	Power Management Function Solar Charger
	Product Type Power Management Development Kit
	Kit Classification Development Board
	Featured Device SPV1040
	Kit Name Up to 5 W Solar Battery Charger with Embedded MPPT Based on SPV1040
	Standards/Approvals No

The STEVAL-ISV006V2 demonstration board is

based on the SPV1040 high efficiency solar

battery charger with embedded MPPT. The

SPV1040 device is a low power, low voltage,

monolithic step-up converter with an input voltage

range from 0.3 V to 5.5 V, and is capable of

maximizing the energy generated by even a single

solar cell (or fuel cell), where low input voltage

handling capability is extremely important.

Thanks to the embedded MPPT algorithm, even

under varying environmental conditions (such as

irradiation, dirt, temperature) the SPV1040 offers

maximum efficiency in terms of power harvested

from the cells and transferred to the output.

The device employs an input voltage regulation

loop, which fixes the charging battery voltage via

a resistor divider. The maximum output current is

set with a current sense resistor according to

charging current requirements.

The SPV1040 protects itself and other application

devices by stopping the PWM switching if either

the maximum current threshold (up to 2 A) is

reached or the maximum temperature limit (up to

155 °C) is exceeded.

STMicroelectronics Up to 5 W Solar Battery Charger with Embedded MPPT Based on SPV1040 Solar Charger for SPV1040

관련된 링크들