STMicroelectronics Demonstration Board for VIPER16LD for Non-Isolated SMPS

본 제품군 열람하기
현재 비가용
죄송합니다. 언제 재입고될지 모릅니다.
RS 제품 번호:
196-1851
제조사 부품 번호:
STEVAL-ISA119V1
제조업체:
STMicroelectronics
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

STMicroelectronics

For Use With

Non-Isolated SMPS

Kit Classification

Evaluation Board

Featured Device

VIPER16LD

Kit Name

Demonstration Board

COO (Country of Origin):
IT
The STEVAL-ISA119V1 is a dual output buck demonstration board using the VIPER16LD, a new off-line high voltage converter by STMicroelectronics which has been specifically developed for non-isolated SMPS. Output regulation is easily achieved through a voltage divider to the output voltage.
The VIPER16LD can work with or without an external supply. In the former case, very low standby consumption is possible(< 50 mW at 265 Vac) while in the latter case, the cost and complication of the IC supply network may be reduced.
The other features of the device include an 800 V avalanche-rugged power section, PWM operation at 60 kHz with frequency jittering for lower EMI, limiting current with adjustable set point, on-board soft-start and safe auto-restart after a fault condition.
The available protection features are thermal shutdown with hysteresis and delayed overload protection.

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.


관련된 링크들