STMicroelectronics Demonstration Board Power Supply for VIPER26 for Switched Mode Power Supply
- RS 제품 번호:
- 196-1838
- 제조사 부품 번호:
- STEVAL-ISA081V1
- 제조업체:
- STMicroelectronics
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩105,167.20
제한된 재고
- 추가로 2025년 12월 08일 부터 2 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 4 | ₩105,167.20 |
| 5 + | ₩103,061.60 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 196-1838
- 제조사 부품 번호:
- STEVAL-ISA081V1
- 제조업체:
- STMicroelectronics
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | STMicroelectronics | |
| Power Management Function | Power Supply | |
| For Use With | Switched Mode Power Supply | |
| Kit Classification | Evaluation Board | |
| Featured Device | VIPER26 | |
| Kit Name | Demonstration Board | |
| 모두 선택 | ||
|---|---|---|
브랜드 STMicroelectronics | ||
Power Management Function Power Supply | ||
For Use With Switched Mode Power Supply | ||
Kit Classification Evaluation Board | ||
Featured Device VIPER26 | ||
Kit Name Demonstration Board | ||
- COO (Country of Origin):
- IT
The STEVAL-ISA081V1 demonstration board is a switched mode power supply (SMPS) demonstration board and it is an isolated SMPS capable of delivering a 12 W output over a wide input voltage range. It is designed for a mains application focusing on cost and size effective solutions.
The STEVAL-ISA081V1 SMPS generates 12 V nominal output voltage using primary regulation and it is based on the VIPER26 monolithic converter, integrating a high voltage MOSFET and PWM controller in one package.
The STEVAL-ISA081V1 SMPS generates 12 V nominal output voltage using primary regulation and it is based on the VIPER26 monolithic converter, integrating a high voltage MOSFET and PWM controller in one package.
Vin: 85 ∼ 305 Vrms / f: 45 ∼ 66 Hz
Vout1: 12 VDC ± 10 %, 1 A (at 3.3 V not loaded)
Vout2: 3.3 VDC ± 4 %, 100 mA
Maximum total output current: 1 A
Standby < 120 mW at 230 VAC
Short-circuit: protected
PCB type and size: FR4, single-side 35 μm, 32 x 90 mm
Isolation: isolated 4 kV / 8 mm
Vout1: 12 VDC ± 10 %, 1 A (at 3.3 V not loaded)
Vout2: 3.3 VDC ± 4 %, 100 mA
Maximum total output current: 1 A
Standby < 120 mW at 230 VAC
Short-circuit: protected
PCB type and size: FR4, single-side 35 μm, 32 x 90 mm
Isolation: isolated 4 kV / 8 mm
For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.
관련된 링크들
- STMicroelectronics Demonstration Board Power Supply for Viper06 for Switched Mode Power Supply
- STMicroelectronics Demonstration Board for VIPer06XN for Power Supply
- STMicroelectronics Demonstration Board Buck Converter for VIPer06XS for Power Supply
- STMicroelectronics Demonstration Board for VIPER16 for Non-Isolated Auxiliary Power Supply
- STMicroelectronics Demonstration Board for VIPER16LD for Non-Isolated SMPS
- STMicroelectronics Demonstration Board Power Supply for L7981 for Step-Down Switching Power Supply
- STMicroelectronics Evaluation Board for VIPER06HS for Power Supply
- STMicroelectronics Demonstration Board Power Supply for L7985A for Step-Down Switching Power Supply
