onsemi NCP1632ADR2G, Power Factor Controller IC 130 kHz 16-Pin, SOIC-16 13V
- RS 제품 번호:
- 254-7620
- 제조사 부품 번호:
- NCP1632ADR2G
- 제조업체:
- onsemi
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 pack of 2 units)*
₩7,059.00
일시적 품절
- 2026년 11월 09일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 2 - 8 | ₩3,529.50 | ₩7,059.00 |
| 10 - 98 | ₩3,149.25 | ₩6,298.50 |
| 100 - 248 | ₩2,973.75 | ₩5,947.50 |
| 250 - 498 | ₩2,525.25 | ₩5,050.50 |
| 500 + | ₩2,388.75 | ₩4,777.50 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 254-7620
- 제조사 부품 번호:
- NCP1632ADR2G
- 제조업체:
- onsemi
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | onsemi | |
| Product Type | Power Factor Controller IC | |
| Start-up Supply Current | 7mA | |
| Maximum Source Current | 32μA | |
| Sub Type | Power Factor Controller IC | |
| Maximum Sink Current | 5mA | |
| Switching Frequency | 130kHz | |
| Supply Current | 7mA | |
| Mount Type | Surface | |
| Package Type | SOIC-16 | |
| Minimum Supply Voltage | 11V | |
| Pin Count | 16 | |
| Maximum Supply Voltage | 13V | |
| Minimum Operating Temperature | -40°C | |
| Length | 10mm | |
| Height | 1.75mm | |
| Standards/Approvals | JEDEC | |
| Series | NCP1632A | |
| Maximum Operating Temperature | 150°C | |
| Automotive Standard | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 onsemi | ||
Product Type Power Factor Controller IC | ||
Start-up Supply Current 7mA | ||
Maximum Source Current 32μA | ||
Sub Type Power Factor Controller IC | ||
Maximum Sink Current 5mA | ||
Switching Frequency 130kHz | ||
Supply Current 7mA | ||
Mount Type Surface | ||
Package Type SOIC-16 | ||
Minimum Supply Voltage 11V | ||
Pin Count 16 | ||
Maximum Supply Voltage 13V | ||
Minimum Operating Temperature -40°C | ||
Length 10mm | ||
Height 1.75mm | ||
Standards/Approvals JEDEC | ||
Series NCP1632A | ||
Maximum Operating Temperature 150°C | ||
Automotive Standard No | ||
The ON Semiconductor NCP series of an integrated dual mosfet driver for interleaved PFC applications. Interleaving consists of paralleling two small stages in lieu of a bigger one, more difficult to design. This approach has several merits like the ease of implementation, the use of smaller components or a better distribution of the heating. Also, Interleaving extends the power range of critical conduction mode that is an efficient and cost-effective technique.
Frequency foldback at low power
Improve light load efficiency
Optimize efficiency over the load range
관련된 링크들
- onsemi, Power Factor Controller IC 130 kHz 16-Pin, SOIC-16 13 V
- onsemi NCP1632DR2G, Power Factor Controller IC 130 kHz 16-Pin, SOIC 10.4 V
- onsemi NCP1655ADR2G, Power Factor Correction IC 130 kHz 9-Pin, SOIC 35 V
- onsemi, Power Factor Controller IC 130 kHz 16-Pin, SOIC 10.4 V
- onsemi, Power Factor Correction IC 130 kHz 9-Pin, SOIC 35 V
- onsemi NCP1618ADR2G, Power Factor Controller IC 65 kHz 9-Pin, SOIC 35 V
- onsemi NCP1631DR2G, Power Factor Controller IC 130 kHz 16-Pin, SOIC 20 V
- onsemi, Power Factor Controller IC 130 kHz 16-Pin, SOIC 20 V