onsemi NCP1655ADR2G, Power Factor Correction IC 130 kHz 9-Pin, SOIC 35 V
- RS 제품 번호:
- 221-6628
- 제조사 부품 번호:
- NCP1655ADR2G
- 제조업체:
- onsemi
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 pack of 10 units)*
₩19,232.40
마지막 RS 재고
- 최종적인 2,470 개 unit(s)이 배송 준비 됨
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 10 - 10 | ₩1,923.24 | ₩19,232.40 |
| 20 - 90 | ₩1,874.36 | ₩18,743.60 |
| 100 - 240 | ₩1,827.36 | ₩18,273.60 |
| 250 - 490 | ₩1,782.24 | ₩17,822.40 |
| 500 + | ₩1,737.12 | ₩17,371.20 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 221-6628
- 제조사 부품 번호:
- NCP1655ADR2G
- 제조업체:
- onsemi
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | onsemi | |
| Product Type | Power Factor Correction IC | |
| Sub Type | Power Factor Controller | |
| Maximum Source Current | 500mA | |
| Maximum Sink Current | 800mA | |
| Switching Frequency | 130kHz | |
| Supply Current | 4mA | |
| Zero Power Detection | Yes | |
| Mount Type | Surface | |
| Package Type | SOIC | |
| Minimum Supply Voltage | 9.5V | |
| Pin Count | 9 | |
| Maximum Supply Voltage | 35V | |
| Minimum Operating Temperature | -40°C | |
| Standards/Approvals | No | |
| Length | 5mm | |
| Series | NCP1655A | |
| Height | 1.75mm | |
| Width | 4 mm | |
| Maximum Operating Temperature | 125°C | |
| Automotive Standard | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 onsemi | ||
Product Type Power Factor Correction IC | ||
Sub Type Power Factor Controller | ||
Maximum Source Current 500mA | ||
Maximum Sink Current 800mA | ||
Switching Frequency 130kHz | ||
Supply Current 4mA | ||
Zero Power Detection Yes | ||
Mount Type Surface | ||
Package Type SOIC | ||
Minimum Supply Voltage 9.5V | ||
Pin Count 9 | ||
Maximum Supply Voltage 35V | ||
Minimum Operating Temperature -40°C | ||
Standards/Approvals No | ||
Length 5mm | ||
Series NCP1655A | ||
Height 1.75mm | ||
Width 4 mm | ||
Maximum Operating Temperature 125°C | ||
Automotive Standard No | ||
The ON Semiconductor NCP1655 is an innovative multimode power factor controller. The circuit naturally transitions from one operation mode to another depending the switching period duration so that the efficiency is optimized over the line/load range. In very−light−load conditions, the circuit can enter the soft−SKIP mode for minimized losses.
Fast line / load transient compensation (Dynamic Response Enhancer)
Large VCC operating range (9.5 V to 35 V)
Line range detection
관련된 링크들
- onsemi NCP1655ADR2G, PFC Controller, 130 kHz, 35 V 9-Pin, SOIC
- onsemi NCP1632ADR2G, PFC Controller, 130 kHz
- onsemi NCP1623ADR2G, PFC Controller
- onsemi NCP1618DDR2G, PFC Controller, 130 kHz, 9.5 V 27-Pin, DIP
- onsemi NCP1618CDR2G, PFC Controller, 130 kHz, 9.5 V 27-Pin, DIP
- onsemi NCP1618ADR2G, Power Factor Controller, 65 kHz, 35 V 9-Pin, SOIC-9 NB
- STMicroelectronics L4986B, PFC Controller, 130 kHz
- STMicroelectronics L4985B, PFC Controller, 130 kHz
