onsemi NCP1632DR2G, Power Factor Controller IC 130 kHz 16-Pin, SOIC 10.4 V
- RS 제품 번호:
- 172-8988
- 제조사 부품 번호:
- NCP1632DR2G
- 제조업체:
- onsemi
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 pack of 10 units)*
₩21,996.00
일시적 품절
- 2026년 8월 17일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 10 - 620 | ₩2,199.60 | ₩21,996.00 |
| 630 - 1240 | ₩2,143.20 | ₩21,432.00 |
| 1250 + | ₩2,113.12 | ₩21,131.20 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 172-8988
- 제조사 부품 번호:
- NCP1632DR2G
- 제조업체:
- onsemi
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | onsemi | |
| Product Type | Power Factor Controller IC | |
| Start-up Supply Current | 100μA | |
| Sub Type | Power Factor Controller | |
| Maximum Source Current | 500mA | |
| Switching Frequency | 130kHz | |
| Maximum Sink Current | 800mA | |
| Supply Current | 7mA | |
| Zero Power Detection | Yes | |
| Mount Type | Surface | |
| Package Type | SOIC | |
| Pin Count | 16 | |
| Minimum Supply Voltage | 9.4V | |
| Maximum Supply Voltage | 10.4V | |
| Minimum Operating Temperature | -40°C | |
| Length | 10mm | |
| Width | 4 mm | |
| Height | 1.5mm | |
| Standards/Approvals | No | |
| Series | NCP1632D | |
| Maximum Operating Temperature | 125°C | |
| Automotive Standard | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 onsemi | ||
Product Type Power Factor Controller IC | ||
Start-up Supply Current 100μA | ||
Sub Type Power Factor Controller | ||
Maximum Source Current 500mA | ||
Switching Frequency 130kHz | ||
Maximum Sink Current 800mA | ||
Supply Current 7mA | ||
Zero Power Detection Yes | ||
Mount Type Surface | ||
Package Type SOIC | ||
Pin Count 16 | ||
Minimum Supply Voltage 9.4V | ||
Maximum Supply Voltage 10.4V | ||
Minimum Operating Temperature -40°C | ||
Length 10mm | ||
Width 4 mm | ||
Height 1.5mm | ||
Standards/Approvals No | ||
Series NCP1632D | ||
Maximum Operating Temperature 125°C | ||
Automotive Standard No | ||
The NCP1632 integrated a dual MOSFET driver for interleaved PFC applications. Interleaving consists of paralleling two small stages in lieu of a bigger one, more difficult to design. This approach has several merits like the ease of implementation, the use of smaller components or a better distribution of the heating. Also, Interleaving extends the power range of Critical Conduction Mode that is an efficient and cost-effective technique (no need for low trr diodes). In addition, the NCP1632 drivers are 180o phase shifted for a significantly reduced current ripple. Housed in a SOIC16 package, the circuit incorporates all the features necessary for building robust and compact interleaved PFC stages, with a minimum of external components.
180° out of phase operation
Low EMI and reduces RMS current in the bulk capacitor
Frequency Clamped Critical conduction Mode (FCCrM) operation
Optimize efficiency over the load range
Frequency foldback at low power
Improve light load efficiency
Integrated Overcurrent protection, Overvoltage protection, UVLO and brown-out protection
Increase system reliability
Applications
All Off Line Appliance Requiring Power Factor Correction
SMPS
Flat panel TVs
Computer Power Supplies
LCD TV
Server power, networking power
관련된 링크들
- onsemi NCP1632DR2G, Power Factor Controller, 130 kHz, 10.4 V 16-Pin, SOIC
- onsemi NCP1631DR2G, Power Factor Controller, 130 kHz, 20 V 16-Pin, SOIC
- onsemi NCP1632ADR2G, PFC Controller, 130 kHz
- onsemi NCP1605DR2G, Power Factor Controller, 250 kHz, 16 V 16-Pin, SOIC
- onsemi NCP1618KDR2G, Power Factor Controller, 130 kHz, 35 V 10-Pin, SOIC
- onsemi NCP1618FDR2G, Power Factor Controller, 130 kHz, 35 V 10-Pin, SOIC
- onsemi NCP1618JDR2G, Power Factor Controller, 130 kHz, 35 V 10-Pin, SOIC
- onsemi NCP1618HDR2G, Power Factor Controller, 130 kHz, 35 V 10-Pin, SOIC
