onsemi, Power Factor Controller IC 130 kHz 27-Pin, DIP 9.5V

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Power Factor Correction 열람하기
현재 비가용
RS는 이 제품을 더 이상 판매하지 않습니다.
포장 옵션
RS 제품 번호:
233-6819P
제조사 부품 번호:
NCP1618CDR2G
제조업체:
onsemi
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

onsemi

Product Type

Power Factor Controller IC

Start-up Supply Current

1.3mA

Sub Type

Power Factor Controller

Maximum Source Current

500mA

Maximum Sink Current

800mA

Switching Frequency

130kHz

Supply Current

4mA

Zero Power Detection

Yes

Mount Type

Surface

Package Type

DIP

Minimum Supply Voltage

9.5V

Pin Count

27

Maximum Supply Voltage

9.5V

Minimum Operating Temperature

-40°C

Standards/Approvals

No

Height

1.75mm

Length

5mm

Series

NCP1618C

Maximum Operating Temperature

125°C

Automotive Standard

No

The ON Semiconductor NCP1618CDR2G is an innovative multimode power factor controller. The circuit naturally transitions from one operation mode to another depending the switching period duration so that the efficiency is optimized over the line/load range. In very−light−load conditions, the circuit can enter the soft−SKIP mode for minimized losses. Housed in a SO-9 package, the circuit further incorporates the features necessary for robust and compact PFC stages, with few external components

A High-voltage start-up current source for VCC capacitor charge at startup

It has an internal compensation of the regulation loop

It offers Soft and Fast-overvoltage protection

It offers Line-Sag and Brown-out detection

관련된 링크들