제조사부품번호

onsemi, Power Factor Correction IC 130 kHz 9-Pin, SOIC 35V

RS 제품 번호:: 221-6628P
제조사 부품 번호:: NCP1655ADR2G
제조업체:: onsemi

onsemi, Power Factor Correction IC 130 kHz 9-Pin, SOIC 35V

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

현재 비가용

RS는 이 제품을 더 이상 판매하지 않습니다.

RS 제품 번호:: 221-6628P
제조사 부품 번호:: NCP1655ADR2G
제조업체:: onsemi

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	onsemi
	Product Type	Power Factor Correction IC
	Sub Type	Power Factor Controller
	Maximum Source Current	500mA
	Switching Frequency	130kHz
	Maximum Sink Current	800mA
	Supply Current	4mA
	Zero Power Detection	Yes
	Mount Type	Surface
	Package Type	SOIC
	Minimum Supply Voltage	9.5V
	Pin Count	9
	Maximum Supply Voltage	35V
	Minimum Operating Temperature	-40°C
	Standards/Approvals	No
	Height	1.75mm
	Length	5mm
	Series	NCP1655A
	Maximum Operating Temperature	125°C
	Automotive Standard	No

	모두 선택
	브랜드 onsemi
	Product Type Power Factor Correction IC
	Sub Type Power Factor Controller
	Maximum Source Current 500mA
	Switching Frequency 130kHz
	Maximum Sink Current 800mA
	Supply Current 4mA
	Zero Power Detection Yes
	Mount Type Surface
	Package Type SOIC
	Minimum Supply Voltage 9.5V
	Pin Count 9
	Maximum Supply Voltage 35V
	Minimum Operating Temperature -40°C
	Standards/Approvals No
	Height 1.75mm
	Length 5mm
	Series NCP1655A
	Maximum Operating Temperature 125°C
	Automotive Standard No

Datasheet - NCP1655ADR2G

The ON Semiconductor NCP1655 is an innovative multimode power factor controller. The circuit naturally transitions from one operation mode to another depending the switching period duration so that the efficiency is optimized over the line/load range. In very−light−load conditions, the circuit can enter the soft−SKIP mode for minimized losses.

Fast line / load transient compensation (Dynamic Response Enhancer)

Large VCC operating range (9.5 V to 35 V)

Line range detection

onsemi, Power Factor Correction IC 130 kHz 9-Pin, SOIC 35V

관련된 링크들