Parker Pneumatic Timer 8 bar max

Subtotal (1 unit)*

₩400,863.45

Add to Basket
수량 선택 또는 입력
재고있음
  • 4 개 단위 배송 준비 완료
  • 추가로 2026년 6월 12일 부터 4 개 단위 배송
  • 추가로 2026년 10월 23일 부터 7 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩400,863.45

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
410-460
제조사 부품 번호:
PRT-F10
제조업체:
Parker
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Parker

Product Type

Pneumatic Timer

Hazardous Area Certification

Conforming to certificate LCIE 866115X, EExe ll T4

Minimum Operating Pressure

3bar

Mount Type

DIN Rail

Maximum Operating Pressure

8 bar

Minimum Operating Temperature

-15°C

Maximum Operating Temperature

60°C

Standards/Approvals

EN 50014 dated March 1977 (NFC 23514 dated May 1982), EN 50019 dated March 1977 (NFC 23519 dated May 1982)

Timer Module


A pneumatic timer consists of a solenoid coil/core, operating spring, timing disk, filter and diaphragm. The core moves up into the coil when it has been energized and this leads to pressure on the diaphragm. The diaphragm moves into the top chamber which un-traps the air through the timing disk. By altering the needle valve you can adjust the amount of delay.

Very Reliable

Long Life Expectancy

Logic Systems


Logic units are best thought of as miniature valves, whose purpose is to influence the behaviour of larger power valves. They achieve this by producing and receiving output and input signals, using the common air supply. In this way, they are able to monitor and control a whole sequence of operations with great accuracy and repeatability.

Note

All logic units require mounting on a separate 2 or 3 port base, available separately. Logic units have an input (green) and output (red) pressure indicator to show the state of the respective signal. Units are supplied with two captive screws for mounting on all types of base and sealing o-rings are in the bottom of each unit.

관련된 링크들