Festo G3/8 in Pressure Regulator - 2 Mpa 5800L/min, G MS

This pressure regulator provides regulated output for compressed Air and inert gases in industrial systems. It is a directly actuated diaphragm controller with rotary knob adjustment and secondary exhausting that maintains a stable downstream pressure for pneumatic equipment. The unit is constructed from die-cast aluminium with NBR Seals and is rated for moderate-corrosion environments. Operating temperatures span -10°C to 60°C and the device accepts G3/8 pneumatic connections.

• 0.3 to 7 bar adjustable range delivers precise pressure control
• 5800 L/min nominal flow supports high-demand pneumatic systems
• 2 MPa maximum operating pressure enables robust upstream conditions
• Diaphragm actuation with return flow reduces pressure overshoot
• Rotary knob with detent permits repeatable set-point selection

• Suitable for feeding pneumatic valves in production lines
• Ideal for compressed Air preparation in tool stations
• Used with inert gas supply for testing and calibration rigs
• Can be used for secondary exhausting in Air-treatment units
• Suitable for food-industry with supplementary materials

Compressed Air to ISO 8573-1:2010 [7:4:4] and inert gases are permitted.

Lubricated operation is possible but, once used, it must remain lubricated for continued operation.

The storage, media and ambient temperature limits are -10°C to 60°C.

The housing is die-cast aluminium and the membrane is manufactured from NBR.

It is intended for mounting with accessories and uses G3/8 pneumatic ports with a 3/8 in gauge-port thread.