제조사부품번호

Festo MS Series Pneumatic Regulator G 1/2 Threaded

RS 제품 번호:: 121-5680
Distrelec 제품 번호:: 301-69-019
제조사 부품 번호:: MS6-LR-1/2-D6-AS
제조업체:: Festo

Festo MS Series Pneumatic Regulator G 1/2 Threaded

Subtotal (1 unit)*

₩91,500.00

30 개 단위 배송 준비 완료
추가로 2026년 9월 02일 부터 1 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩91,500.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 121-5680
Distrelec 제품 번호:: 301-69-019
제조사 부품 번호:: MS6-LR-1/2-D6-AS
제조업체:: Festo

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Festo
	Product Type	Pneumatic Regulator
	Inlet Connection Type	Threaded
	Inlet Connection Size	G 1/2
	Outlet Connection Type	Threaded
	Series	MS
	Inlet Port Gender	Female
	Maximum Operating Pressure	20 bar
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	60°C
	Standards/Approvals	ATEX Category II 2GD, ISO 8573-1:2010 (7:4:4), cULus recognised (OL), CE mark to EU Explosion Protection Directive (ATEX), RoHS
	Model Number	529991

	모두 선택
	브랜드 Festo
	Product Type Pneumatic Regulator
	Inlet Connection Type Threaded
	Inlet Connection Size G 1/2
	Outlet Connection Type Threaded
	Series MS
	Inlet Port Gender Female
	Maximum Operating Pressure 20 bar
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 60°C
	Standards/Approvals ATEX Category II 2GD, ISO 8573-1:2010 (7:4:4), cULus recognised (OL), CE mark to EU Explosion Protection Directive (ATEX), RoHS
	Model Number 529991

COO (Country of Origin):: HU

Festo Pneumatic Regulator, Die-Cast Aluminium Housing, Size 6 - MS6-LR-1/2-D6-AS

Keep your system's pressure in check with this pneumatic regulator from Festo. When it senses the pressure is at a pre-set level, it immediately cuts off the air supply to hold things steady. Controlling the unit's a breeze thanks to the front-facing rotary knob that lets you easily adjust the setting. You can keep a close eye on the built-in analogue gauge on the front to make sure your system is ticking over as it should.

Features & Benefits

• PE filter traps contaminants to prevent dirt build-up

• Standard nominal flow rate of 6,500L/min for safe use in high-flow pneumatic systems

• Durable die-cast aluminium housing resists corrosion

• Lockable control knob helps prevent tampering

• Lubricated operation possible to minimise the risk of friction and damage caused by wear

Applications

• Water treatment facilities

• Laboratories

• Oil and gas industry

What's the setting range of this regulator?

The pressure setting range is between 0.3 and 7 bar, so you'll find this unit's the right tool for keeping your low-pressure system in line.

Is this regulator sealed?

Yes, this regulator's sealed. It comes with robust NBR rings to prevent leakage.