Festo MS Series Pneumatic Regulator G 1/4 Female
- RS 제품 번호:
- 121-5659
- Distrelec 제품 번호:
- 301-68-992
- 제조사 부품 번호:
- MS4-LR-1/4-D6-AS
- 제조업체:
- Festo
Subtotal (1 unit)*
₩69,780.00
재고있음
- 222 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩69,780.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 121-5659
- Distrelec 제품 번호:
- 301-68-992
- 제조사 부품 번호:
- MS4-LR-1/4-D6-AS
- 제조업체:
- Festo
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Festo | |
| Product Type | Pneumatic Regulator | |
| Inlet Connection Type | Female | |
| Inlet Connection Size | G 1/4 | |
| Outlet Connection Type | Female | |
| Series | MS | |
| Inlet Port Gender | Female | |
| Maximum Operating Pressure | 20 bar | |
| Minimum Operating Temperature | -10°C | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | ATEX category gas II 2G, cULus recognised (OL), ISO 8573-1:2010 (7:4:4), ATEX category dust II 2D, CE mark to EU Explosion Protection Directive (ATEX), RoHS | |
| Model Number | 529417 | |
| 모두 선택 | ||
|---|---|---|
브랜드 Festo | ||
Product Type Pneumatic Regulator | ||
Inlet Connection Type Female | ||
Inlet Connection Size G 1/4 | ||
Outlet Connection Type Female | ||
Series MS | ||
Inlet Port Gender Female | ||
Maximum Operating Pressure 20 bar | ||
Minimum Operating Temperature -10°C | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals ATEX category gas II 2G, cULus recognised (OL), ISO 8573-1:2010 (7:4:4), ATEX category dust II 2D, CE mark to EU Explosion Protection Directive (ATEX), RoHS | ||
Model Number 529417 | ||
- COO (Country of Origin):
- HU
Festo Pneumatic Regulator, G1/4 Port Connection, 7 Bar Maximum Input Pressure - MS4-LR-1/4-D6-AS
Are you in need of a way to maintain the output air pressure of your pneumatic compressor? This Festo pneumatic regulator automatically shuts off the airflow when the set pressure is reached to keep it at the correct level for your setup. It has a G1/4 threaded end that tightens in place so the connected pipe remains secure, even in vibrating systems. With an operating temperature range between -10°C and +60°C, this regulator is suitable for use in harsh industrial environments.
• Up to 7 bar input pressure for receiving air from low-pressure systems
• Typical flow rate of 1800L/min (litres per minute), ensuring your equipment has maximum flow capability
• Suitable for front panel mounting or in-line installation for versatile setup options
Applications
• Heating furnaces
• Gas grills
• Medical respirators
• Dental equipment
What's this pneumatic regulator made of?
This pneumatic regulator has a die-cast aluminium housing material to prevent corrosion wear. Its seals are made from NBR (nitrile rubber) to insulate the regulator against leaks. The control panel is made from PA and POM (polyoxymethylene), which have high-tensile strength and remain rigid under pressure.
관련된 링크들
- Festo MS Series Pneumatic Regulator G 1/4 Pneumatic G
- Festo MS Series Pneumatic Regulator G 1/4 G
- Festo MS Series Pneumatic Regulator G 1/4 Pneumatic G G
- Festo MS Series Pneumatic Regulator G 1/4 G G
- Festo MS Series Pneumatic Regulator G 1/8 G
- Festo MS Series Pneumatic Regulator G 1/4 Female
- Festo MS Series Pneumatic Regulator G 1/8 G G
- Festo MS Series Pneumatic Regulator G 1/8 Female