SMC Pneumatic Guided Cylinder - 12mm Bore, MGP Series, 20 mm Double Acting Acting

Subtotal (1 unit)*

₩369,380.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 1 개 단위 배송 준비 완료
  • 추가로 2026년 11월 27일 부터 12 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩369,380.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
757-8632
제조사 부품 번호:
MGPM12-20Z
제조업체:
SMC
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SMC

Product Type

Pneumatic Guided Cylinder

Bore Diameter

12mm

Series

MGP

Action Type

Double Acting

Maximum Operating Pressure

1 Mpa

Cushioning Type

Rubber

Minimum Operating Temperature

-10°C

Piston Rod Thread Size

M5 x 0.8

Rod Type

Single

Guide Type

Slide Bearing

Maximum Piston Speed

500mm/s

Piston Rod Thread Standard

Rc

Maximum Operating Temperature

60°C

Width

26mm

Height

58mm

Standards/Approvals

ISO 10218-1, ISO 4413, ISO 4414, IEC 60204-1

Weight

280g

Length

62mm

Stroke Length

20mm

SMC MGP Series Compact Guide Cylinder, 20mm Stroke Length, 12mm Bore size - MGPM12-20Z


This Compact guide cylinder provides guided linear motion for automated systems where space is limited. It operates as a double-acting pneumatic actuator with integrated slide bearings and end cushioning, designed for high-cycle applications in industrial automation, electronics assembly and mechanical handling.

Features and Benefits:


• 1 MPa maximum operating pressure for robust pneumatic force delivery
• 500 mm/s maximum piston speed for high-speed motion requirements
• 20mm stroke for short-travel positioning tasks
• Rubber bumper cushioning on both ends to reduce shock transfer
• M5x0.8 piston-rod thread enabling fine attachment compatibility
• Slide-bearing guide for accurate lateral stability under load

Applications


• Suitable for pick-and-place stations in electronics production
• Ideal for linear positioning in robotic end-effectors
• Used for component feeding and indexing in automation lines
• Can be used for gate or clamp actuation in assembly machinery

What temperatures can it withstand during operation?


It is specified to operate between -10°C and 60°C, allowing use in typical factory environments without additional thermal control.

How Compact is the unit for machine integration?


The actuator has a low-height profile and a reduced weight of 0.234 kg to ease integration into confined assemblies.

What mounting or rod connection considerations apply?


The rod uses an Rc-standard thread sized M5x0.8, permitting common threaded fittings and straightforward mechanical attachment.

Are there industry standards relevant to its safety and design?


It conforms to recognised standards for machinery and fluid-power control, supporting compatibility with regulated industrial systems.

Note

May be used with reed switch 161-782, available in most markets.

관련된 링크들