제조사부품번호

SMC R Plug Fitting

RS 제품 번호:: 778-688
제조사 부품 번호:: PLUG1/2
제조업체:: SMC

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

본 제품군 열람하기

Subtotal (1 unit)*

₩5,040.00

재고있음

추가로 2026년 10월 26일 부터 44 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩5,040.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 778-688
제조사 부품 번호:: PLUG1/2
제조업체:: SMC

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	SMC
	Connection Size	1/2 in
	Product Type	Plug Fitting
	Thread Standard	R
	Series	Plug
	Head Type	Hex Socket
	Connection Type	R 1/2
	Maximum Operating Pressure	1 MPa
	Minimum Operating Temperature	0°C
	Maximum Operating Temperature	60°C
	Standards/Approvals	No

	모두 선택
	브랜드 SMC
	Connection Size 1/2 in
	Product Type Plug Fitting
	Thread Standard R
	Series Plug
	Head Type Hex Socket
	Connection Type R 1/2
	Maximum Operating Pressure 1 MPa
	Minimum Operating Temperature 0°C
	Maximum Operating Temperature 60°C
	Standards/Approvals No

Datasheet - PLUG1/2

COO (Country of Origin):: JP

SMC Plug Series Plug Fitting, 1/2 inch Connection Size, R 1/2 Thread Standard - PLUG1/2

This plug fitting provides a sealed closure for fluid or gas lines in industrial environments, designed to be installed into R thread connections to block flow when required. It operates under moderate thermal conditions and is intended for systems where a compact, serviceable end cap is needed.

Features and Benefits:

• R1/2 threaded connection offers secure engagement and leak prevention
• 1MPa maximum pressure rating supports medium-pressure systems
• 0-60°C operating temperature range suits temperate installations
• Hex socket head enables recessed tightening with Allen tools
• 1/2 in connection size fits common half-inch piping systems

Applications

• Suitable for isolating test ports on pneumatic manifolds
• Ideal for temporarily capping process sampling lines
• Used with hydraulic circuits within 1MPa pressure limits
• Can be used for closing unused branch connections in pipework
• Used for maintenance sealing where confined access exists

What tooling is required to install and remove this component?

Installation and removal use an internal hex key engaging the hex socket head to apply torque without obstructing adjacent fittings.

How should it be selected for temperature-sensitive installations?

Choose this item when system fluids remain within the 0-60°C operating window to avoid thermal overstress.

Is the connection compatible with standard tapered threads?

The part uses an R thread form and connects to mating R1/2 ports designed for that thread standard.

What pressure conditions must be observed during service?

Do not exceed the maximum operating pressure of 1MPa to maintain sealing integrity and prevent failure.