SKF SNL 215 Plummer Block House -, 75 mm ID

본 제품군 열람하기

Subtotal (1 unit)*

₩358,936.50

Add to Basket
수량 선택 또는 입력
재고있음
  • 1 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩358,936.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
213-2015
제조사 부품 번호:
SNL 215
제조업체:
SKF
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SKF

Product Type

Plummer Block House

Material

Cast Iron

Centre Height

80mm

Mount Hole Size

16 mm

Length

280mm

Depth

115mm

Mount Hole Centre-to-Centre

230mm

For Use With

Bearings with a Cylindrical Bore

Number of Bolts

2

Height

155mm

Standards/Approvals

No

Series

SNL 215 + 22215 SE

COO (Country of Origin):
LT

SKF Plummer Block House, 102.5mm Bore Diameter, 130mm Seating Diameter - SNL 215


Get your industrial shaft spinning with this plummer block house from SKF. To get you moving in no time, installation is easy. There are two predrilled mount holes on the base so you can fasten the unit onto a flat surface. Then, simply insert a bearing into the housing and complete the setup by threading a shaft through the inner ring. As it’s made from strong cast iron, this is a reliably durable option that will hold up its end of the bargain in harsh conditions.

Features & Benefits


• Cast-iron housing is impact-resistant, so it can take plenty of knocks

• Can be relubricated with grease to support a long service life

• Comes with corrosion-protection paint for use in areas with high levels of water vapour

Applications


• Conveyor systems

• Heat treatment facilities

• Packaging industry

How much does this housing weigh?


This plummer block house weighs 7.09kg, so it's a heavyweight contender.

What bolts should I use to mount this plummer block house?


This plummer block house has bolt holes that you can use to mount it using two 16mm screws.

관련된 링크들