INA PSHE25-XL-N Plummer Block House -, 25 mm ID

RS 제품 번호:: 137-1874
제조사 부품 번호:: PSHE25-XL-N
제조업체:: INA

INA PSHE25-XL-N Plummer Block House -, 25 mm ID

본 제품군 열람하기

대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩87,769.50

재고있음

추가로 2026년 4월 27일 부터 16 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 - 12	₩87,769.50
13 - 24	₩85,293.00
25 +	₩84,064.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

Better World

Our Better World range features products that make it easy for you to make a greener product choice you can trust. Click here to find out more.

RS 제품 번호:: 137-1874
제조사 부품 번호:: PSHE25-XL-N
제조업체:: INA

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	INA
	Inside Diameter	25mm
	Product Type	Plummer Block House
	Material	Cast Iron
	Centre Height	36.5mm
	Mount Hole Size	M10, M6
	Length	70mm
	Depth	31mm
	Mount Hole Centre-to-Centre	50.8mm
	For Use With	PSHE Roller and Plain Bearings
	Standards/Approvals	No
	Series	PSHE
	Height	70mm
	Better World Product	Yes
	Better World Claim	Extended Product Life, Saves Energy

	모두 선택
	브랜드 INA
	Inside Diameter 25mm
	Product Type Plummer Block House
	Material Cast Iron
	Centre Height 36.5mm
	Mount Hole Size M10, M6
	Length 70mm
	Depth 31mm
	Mount Hole Centre-to-Centre 50.8mm
	For Use With PSHE Roller and Plain Bearings
	Standards/Approvals No
	Series PSHE
	Height 70mm
	Better World Product Yes
	Better World Claim Extended Product Life, Saves Energy

Datasheet

로그인하여 CAD 모델 다운로드

Plummer Block Housing Unit

Plummer block housing units have a long or a short base. Housings with a long base are screw mounted to the adjacent construction by slots, housings with a short base by blind threaded holes.;Due to the spherical outside surface of the bearing outer ring and the concave housing bore, housing units can compensate for static angular misalignment of the shaft.

Features and Benefits

• Cast iron housing;• Ready-to-fit;• Can compensate for static angular misalignment of the shaft;• Screw mounted

Product Application Information

The units are used predominantly as locating bearings, but are also suitable as non-locating bearings under low loads and speeds.

Suffixes

N - Cast iron housing with undercut slot for end caps