RS PRO Opaque Fluoroplastics PTFE Rod, 300 mm x 70 mm Diameter

모든 Plastic Rods 열람하기

Subtotal (1 lot of 1 unit)*

₩223,362.80

Add to Basket
수량 선택 또는 입력
재고있음
  • 10 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
Lot(s)
Per Lot
1 +₩223,362.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
196-9972
제조업체:
RS PRO
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

RS PRO

Product Type

Fluoroplastics PTFE Rod

Colour

Opaque

Length

300mm

Material

Polytetrafluoroethylene

Rod Diameter

70mm

Density

2.21g/cm³

Tensile Strength

25MPa

Standards/Approvals

No

Maximum Operating Temperature

260°C

Flammability Rating

UL 94 V-0

Water Absorption

0.3%

Elongation

0.5%

Hardness

30 Ball Indentation

Thermal Conductivity

0.25W/mK

RS PRO Opaque Fluoroplastics PTFE Rod, 300 mm x 70 mm Diameter


This opaque fluoroplastics PTFE (polytetrafluoroethylene) rod measures 300 mm in length and 70 mm in diameter. It's useful for insulation, chemical and mechanical applications.

Thanks to its PTFE construction, this rod is resistant to chemicals and radiation and holds up under harsh operating conditions. It has excellent dielectric properties, so it's a good insulator, and it's safe for use at temperatures up to +260°C. It has a high tensile strength of 25 MPa and is low-friction and low-adhesion.

Part of the RS PRO series, this product is tested for safety and quality. It meets the standards of the DIN (Deutsches Institut für Nurmung, German Institute for Standardisation) and the ASTM (American Society for Testing and Materials) for plastic and elastomer testing. It also has a flammability rating of UL 94 V-0 from Underwriters Laboratories.

You'll find this fluoroplastics PTFE rod suitable for applications such as high-frequency insulation and pipe lining.

Features and Benefits


• Fluoroplastics PTFE (polytetrafluoroethylene) rod

• Opaque in colour

• Length of 300 mm

• Diameter of 70 mm

• Elongation of 50%

• Density of 2.18 → 2.21 g/cm³

• Tensile strength of 25 MPa

• Hardness of 30 Ball Indentation

• Maximum operating temperature of +260°C

• Melting point of +327°C

• Thermal conductivity of 0.25 W/mK

• Water absorption of 0.3%

• UL 94 V-0 flammability rating

• Conforms to DIN 53479, DIN 53736 and ASTM-D 1929 for testing of plastics and elastomers

RS PRO


RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.

Note

The PTFE sheets supplied have a size tolerance of ±5 mm

Standards

DIN 53479; DIN 53736; ASTM-D 1929

관련된 링크들