사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	onsemi
	Mounting Type	Surface Mount
	Package Type	SOIC
	Pin Count	8
	Dimensions	5 x 4 x 1.5mm
	Length	5mm
	Width	4mm
	Height	1.5mm
	Maximum Operating Supply Voltage	34 V
	Maximum Operating Temperature	+150 °C
	Minimum Operating Supply Voltage	5 V
	Minimum Operating Temperature	-40 °C
	Automotive Standard	AEC-Q100

	모두 선택
	브랜드 onsemi
	Mounting Type Surface Mount
	Package Type SOIC
	Pin Count 8
	Dimensions 5 x 4 x 1.5mm
	Length 5mm
	Width 4mm
	Height 1.5mm
	Maximum Operating Supply Voltage 34 V
	Maximum Operating Temperature +150 °C
	Minimum Operating Supply Voltage 5 V
	Minimum Operating Temperature -40 °C
	Automotive Standard AEC-Q100

Datasheet NCV8461DR2G

The NCV8461 is a fully protected High-Side driver that can be used to switch a wide variety of loads, such as bulbs, solenoids and other activators. The device is internally protected from an overload condition by an active current limit and thermal shutdown. A diagnostic output reports OFF state open load conditions as well as thermal shutdown.

Short Circuit Protection
Thermal Shutdown with Automatic Restart
CMOS (3 V/5 V) Compatible Control Input
Off State Open Load Detection
Overvoltage Protection
Undervoltage Shutdown
Loss of Ground and Loss of VD Protection
ESD Protection
Reverse Battery Protection (with external resistor)
Very Low Standby Current
End Products
Automobiles
Applications
Switch a Variety of Resistive, Inductive and Capacitive Loads
Can Replace Electromechanical Relays and Discrete Circuits

수량	한팩당
630 - 1240	₩2,068.00
1250 +	₩2,037.92

NCV8461DR2G, Peripheral Controller 8-Pin SOIC

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.