Hirose DF1BZ Series Right Angle Through Hole PCB Header, 16 Contact(s), 2.5 mm Pitch, 2 Row, Shrouded
- RS 제품 번호:
- 176-7497
- 제조사 부품 번호:
- DF1BZ-16DP-2.5DS
- 제조업체:
- Hirose
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 pack of 10 units)*
₩8,704.40
재고있음
- 10 개 단위 배송 준비 완료
- 추가로 2026년 1월 01일 부터 140 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 10 - 20 | ₩870.44 | ₩8,704.40 |
| 30 - 40 | ₩851.64 | ₩8,516.40 |
| 50 + | ₩832.84 | ₩8,328.40 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 176-7497
- 제조사 부품 번호:
- DF1BZ-16DP-2.5DS
- 제조업체:
- Hirose
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Hirose | |
| Series | DF1BZ | |
| Product Type | PCB Header | |
| Current | 3A | |
| Pitch | 2.5mm | |
| Number of Contacts | 16 | |
| Housing Material | Polyamide | |
| Number of Rows | 2 | |
| Orientation | Right Angle | |
| Shrouded/Unshrouded | Shrouded | |
| Connector System | Wire-to-Board | |
| Mount Type | Through Hole | |
| Contact Plating | Tin | |
| Contact Material | Brass | |
| Row Pitch | 2.5mm | |
| Minimum Operating Temperature | -35°C | |
| Termination Type | Solder | |
| Contact Gender | Male | |
| Tail Pin Length | 3.3mm | |
| Maximum Operating Temperature | 85°C | |
| Mating Pin Length | 4.5mm | |
| Standards/Approvals | No | |
| Voltage | 650 V | |
| 모두 선택 | ||
|---|---|---|
브랜드 Hirose | ||
Series DF1BZ | ||
Product Type PCB Header | ||
Current 3A | ||
Pitch 2.5mm | ||
Number of Contacts 16 | ||
Housing Material Polyamide | ||
Number of Rows 2 | ||
Orientation Right Angle | ||
Shrouded/Unshrouded Shrouded | ||
Connector System Wire-to-Board | ||
Mount Type Through Hole | ||
Contact Plating Tin | ||
Contact Material Brass | ||
Row Pitch 2.5mm | ||
Minimum Operating Temperature -35°C | ||
Termination Type Solder | ||
Contact Gender Male | ||
Tail Pin Length 3.3mm | ||
Maximum Operating Temperature 85°C | ||
Mating Pin Length 4.5mm | ||
Standards/Approvals No | ||
Voltage 650 V | ||
- COO (Country of Origin):
- JP
New Insulation Displacement and Crimping Ideas:
This connector is a new type to insert the ID contacts in the case. Using this method, the following merits can be gained.
By using the ID contact and crimping contact together, different current capacity cables can be mixed in one case.
After connection, the contact can be replaced in excellent maintainability.
Because the insulation displacement area is protected by the case, high reliability can be assured.
관련된 링크들
- Hirose DF1BZ Series Right Angle Through Hole PCB Header, 16 Contact(s), 2.5 mm Pitch, 2 Row, Shrouded
- Hirose DF1BZ Series Right Angle Through Hole PCB Header, 10 Contact(s), 2.5 mm Pitch, 2 Row, Shrouded
- Hirose DF1BZ Series Right Angle Through Hole PCB Header, 40 Contact(s), 2.5 mm Pitch, 2 Row, Shrouded
- Hirose DF1BZ Series Right Angle Through Hole PCB Header, 14 Contact(s), 2.5 mm Pitch, 2 Row, Shrouded
- Hirose DF1BZ Series PCB Header, 22 Contact(s), 2.5 mm Pitch, 2 Row, Shrouded
- Hirose DF1BZ Series PCB Header, 24 Contact(s), 2.5 mm Pitch, 2 Row, Shrouded
- Hirose DF1BZ Series PCB Header, 20 Contact(s), 2.5 mm Pitch, 2 Row, Shrouded
- Hirose DF1BZ Series Right Angle Through Hole PCB Header, 2 Contact(s), 2.5 mm Pitch, 1 Row, Shrouded