Hirose DF1BZ Series Right Angle Through Hole PCB Header, 14 Contact(s), 2.5 mm Pitch, 2 Row, Shrouded
- RS 제품 번호:
- 176-7354
- 제조사 부품 번호:
- DF1BZ-14DP-2.5DS
- 제조업체:
- Hirose
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
Subtotal (1 pack of 100 units)*
₩65,800.00
일시적 품절
- 2026년 2월 02일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 100 - 100 | ₩658.00 | ₩65,818.80 |
| 200 - 300 | ₩641.08 | ₩64,164.40 |
| 400 + | ₩631.68 | ₩63,186.80 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 176-7354
- 제조사 부품 번호:
- DF1BZ-14DP-2.5DS
- 제조업체:
- Hirose
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Hirose | |
| Product Type | PCB Header | |
| Series | DF1BZ | |
| Current | 3A | |
| Pitch | 2.5mm | |
| Housing Material | Polyamide | |
| Number of Contacts | 14 | |
| Number of Rows | 2 | |
| Orientation | Right Angle | |
| Shrouded/Unshrouded | Shrouded | |
| Connector System | Wire-to-Board | |
| Mount Type | Through Hole | |
| Contact Material | Brass | |
| Contact Plating | Tin | |
| Termination Type | Solder | |
| Row Pitch | 2.5mm | |
| Minimum Operating Temperature | -35°C | |
| Maximum Operating Temperature | 85°C | |
| Tail Pin Length | 3.3mm | |
| Mating Pin Length | 4.5mm | |
| Standards/Approvals | No | |
| Voltage | 650 V | |
| 모두 선택 | ||
|---|---|---|
브랜드 Hirose | ||
Product Type PCB Header | ||
Series DF1BZ | ||
Current 3A | ||
Pitch 2.5mm | ||
Housing Material Polyamide | ||
Number of Contacts 14 | ||
Number of Rows 2 | ||
Orientation Right Angle | ||
Shrouded/Unshrouded Shrouded | ||
Connector System Wire-to-Board | ||
Mount Type Through Hole | ||
Contact Material Brass | ||
Contact Plating Tin | ||
Termination Type Solder | ||
Row Pitch 2.5mm | ||
Minimum Operating Temperature -35°C | ||
Maximum Operating Temperature 85°C | ||
Tail Pin Length 3.3mm | ||
Mating Pin Length 4.5mm | ||
Standards/Approvals No | ||
Voltage 650 V | ||
- COO (Country of Origin):
- JP
Hirose PCB Header
The Hirose PCB DF1BZ series through-hole mount right angle PCB header has 14-way contacts. It has a voltage rating of 250VAC, 500VDC, 650VAC and a current rating of 3A. The header has tin-plated brass contact material. This connector is used to insert ID contacts in case. The use of ID contacts and crimping contacts can help in mixing different current capacity cables in one case. After connection, the contact can be replaced in excellent maintainability because the insulation displacement area is protected by the case. It is used in portable and handheld equipment.
Features and Benefits
• Dual row
• High reliability
• Operating temperature ranges between -35°C and 85°C
• Pitch size is 2.5mm
• Termination method is solder
• Unshrouded header
관련된 링크들
- Hirose DF1BZ Series Right Angle Through Hole PCB Header, 14 Contact(s), 2.5 mm Pitch, 2 Row, Shrouded
- Hirose DF1BZ Series Right Angle Through Hole PCB Header, 16 Contact(s), 2.5 mm Pitch, 2 Row, Shrouded
- Hirose DF1BZ Series Right Angle Through Hole PCB Header, 10 Contact(s), 2.5 mm Pitch, 2 Row, Shrouded
- Hirose DF1BZ Series Right Angle Through Hole PCB Header, 40 Contact(s), 2.5 mm Pitch, 2 Row, Shrouded
- Hirose DF1BZ Series PCB Header, 22 Contact(s), 2.5 mm Pitch, 2 Row, Shrouded
- Hirose DF1BZ Series PCB Header, 24 Contact(s), 2.5 mm Pitch, 2 Row, Shrouded
- Hirose DF1BZ Series PCB Header, 20 Contact(s), 2.5 mm Pitch, 2 Row, Shrouded
- Hirose DF1BZ Series Right Angle Through Hole PCB Header, 2 Contact(s), 2.5 mm Pitch, 1 Row, Shrouded