Tesa White, Transparent 4100 Packing Tape, 66 m x 75mm

This packing tape is a pressure-sensitive adhesive tape designed for sealing and labelling in industrial and logistics settings. It combines a PVC film backing with a natural rubber adhesive to provide dependable surface contact and is available in both white and transparent finishes for Visual or discreet sealing needs.

• Natural rubber adhesive delivers 2.2N/cm adhesion strength
• PVC film backing provides high tensile resistance of 47N/cm
• Elongation at break 75% allows controlled stretch during application
• Thickness 0.065mm supports consistent unwind and surface conformity
• Available in 75mm width for broad area coverage
• Supplied in 66m length to reduce frequent roll changes

• Used for secure carton sealing in packing lines
• Suitable for visible labelling where a white finish is required
• Ideal for clear sealing when transparency is necessary
• Used with a hand dispenser for manual tape application
• Compatible with automatic sealing equipment on conveyors

It uses a natural rubber adhesive which provides immediate tack and a firm initial bond on corrugated and cardboard surfaces.

The backing is a polyvinyl chloride film that contributes to the measured tensile strength and resistance to elongation under load.

The tape exhibits 75% elongation at break, permitting controlled extension without premature failure during applied tension.

The tape is offered in white and transparent variants and is pre-printed to assist with identification or messaging needs.