Fluke MDA-550 Series, 500 MHz Portable Oscilloscope

모든 Oscilloscopes 열람하기

Subtotal (1 unit)*

₩24,194,885.60

Add to Basket
수량 선택 또는 입력
재고있음
  • 2 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩24,194,885.60

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
271-0127
Distrelec 제품 번호:
303-89-920
제조사 부품 번호:
FLUKE-MDA-550/FPC EU
제조업체:
Fluke
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Fluke

Product Type

Oscilloscope

Bandwidth

500MHz

Oscilloscope Type

Portable

Oscilloscope Form

Digital Storage

Memory Depth

400Mpts

Interface Type

USB

Series

MDA-550

Standards/Approvals

IEC 61010-2-030, IEC 61010-3

Power Source

Battery

Safety Category Voltage

1000V

Safety Category Level

CAT III, CAT IV

Battery Type

Lithium-ion

Battery Life

7h

COO (Country of Origin):
RO

Fluke MDA-550 Series Oscilloscope, 500MHz Bandwidth, Portable Type - FLUKE-MDA-550/FPC EU


This portable oscilloscope functions as a mixed-domain motor-drive analyser for fault finding on inverter motor systems. It guides users through connections and test selection, captures voltage, current and harmonics measurements, and generates on-instrument text reports for as-found and as-left documentation in industrial settings.

Features & Benefits


• 500MHz bandwidth delivers high-frequency capture for fast transients
• Four-channel input supports simultaneous multi-point analysis
• Battery operation enables field measurements without mains power
• USB Interface and WiFi support simplify data transfer to PC
• Extended harmonics to 150kHz reveals high-order switching noise
• Shaft-voltage probe set detects impulse discharges to prevent bearing damage

Applications


• Suitable for troubleshooting inverter drive input and output faults
• Ideal for assessing DC bus ripple under load conditions
• Used for extended harmonics surveys on industrial power systems
• Can be used for motor shaft voltage diagnostics to prevent bearing failure
• Suitable for commissioning and benchmarking drive performance over time

What insulation-stress measurements can be performed on PWM outputs?


The instrument reports dV/dt, rise/fall times and Peak voltages to assess insulation exposure from Rapid voltage changes.

How are harmonics analysed across different frequency bands?


Harmonic analysis covers DC–51st, 1–9kHz and 9–150kHz ranges, Plus a spectrum mode for voltage modulation up to500MHz.

How is data captured and exported for reporting?


Users can save approximately50 screens to an on-instrument text report, then transfer via mini-USB, USB stick up to32GB or WiFi using supplied PC software.

What safety-rated measurements are supported at the service entrance?


The measuring inputs accept up to1000V to earth and are rated for600V CAT IV/1000V CAT III via compatible high-voltage probes.

Which probe and clamp options allow current and shaft diagnostics?


The tool supports multiple voltage probe ratios and current-clamp scale factors from0.1mV/A to400mV/A, Plus a shaft-voltage set with carbon-fibre brushes for discharge detection.

관련된 링크들