Fluke 190 II ScopeMeter Series, 500 MHz Portable Oscilloscope, 4 Channels

Subtotal (1 unit)*

₩17,940,620.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 10월 01일 부터 4 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩17,940,620.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
271-0124
제조사 부품 번호:
FLUKE-190-504/FPC EU
제조업체:
Fluke
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Fluke

Product Type

Oscilloscope

Bandwidth

500MHz

Number of Channels

4

Oscilloscope Type

Portable

Oscilloscope Form

Digital Storage

Interface Type

USB

Screen Size

6 in

Series

190 II ScopeMeter

Width

190mm

Depth

70mm

Height

190mm

Standards/Approvals

ANSI/ISA 82.02.01, CAN/CSA C22.2, EN 61010-1:2010, UL 61010-1:2012, UL 61010B

Maximum Time Base

4s/div

Battery Type

Lithium-ion

Vertical Resolution

8 bit

Display Type

LCD

Battery Life

7h

Rise Time

0.7ns

Minimum Time Base

1ms/div

Power Source

Mains Adapter, Battery Power Supply

Safety Category Voltage

600V, 1000V

Safety Category Level

CAT III, CAT IV

COO (Country of Origin):
RO

Fluke 190 II ScopeMeter Series Oscilloscope, 500MHz Bandwidth, 6 inch Screen Size - FLUKE-190-504/FPC EU


This oscilloscope is a portable digital storage instrument designed for field and industrial diagnostics, enabling waveform capture, analysis and long-term recording in dust- and drip-prone environments. It provides multi-channel isolated inputs for direct measurement on live equipment and supports both battery and mains operation for flexible on-site use.

Features and Benefits:


• 500MHz bandwidth with 0.7ns rise time for high-speed signal capture
• Four independent floating inputs offering up to 1000V isolation
• 5GS/s real-time single-channel sampling for transient detail
• Deep memory with 10,000 samples per trace for detailed analysis
• Battery operation up to 7h using higher-capacity Li‑Ion pack
• USB host and device ports for direct data storage and PC transfer

Applications


• Suitable for troubleshooting motor drives and inverters
• Ideal for capturing intermittent glitches on control signals
• Used with FFT analysis for frequency-spectrum diagnostics
• Can be used for long-term TrendPlot logging of measurements
• Suitable for on-site measurements requiring CAT III/CAT IV ratings

How does the instrument protect users when measuring high voltages?


The inputs are independently insulated and rated for safety categories up to CAT III 1000V and CAT IV 600V, limiting maximum floating voltage between any contact and earth/ground.

What recorder modes are available for extended monitoring?


It offers a roll-mode ScopeRecord with 30,000 points per channel and TrendPlot recording that stores 19,200 sample sets per measurement for long-duration logging.

How are captured waveforms archived without a PC?


A USB host port permits direct saving of waveform data, screen copies and complete datasets onto a flash memory drive up to 2GB.

What display and acquisition features aid Visual analysis?


The 6in full-colour LCD provides digital persistence modes, zoom to sample level and automatic replay of the last 100 captured screens.

How is battery swapping handled during field work?


The rechargeable Li‑Ion pack is accessible via a rear battery door allowing quick replacement while retaining RAM-backed data for a brief interval during exchange.

관련된 링크들