Teledyne LeCroy ZS Series ZS1000 Oscilloscope Probe, Voltage Type, 1 GHz, 10:1, ProBus Connector

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Oscilloscope Probes 열람하기

Subtotal (1 unit)*

₩3,689,595.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 7 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩3,689,595.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
672-1706
Distrelec 제품 번호:
176-25-945
제조사 부품 번호:
ZS1000
제조업체:
Teledyne LeCroy
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Teledyne LeCroy

Probe Type

Voltage

Product Type

Oscilloscope Probe

Attenuation

10:1

Bandwidth

1GHz

Maximum Common Mode Input Voltage

20V

Connector Type

ProBus

Model Number

ZS1000

Series

ZS

Standards/Approvals

No

해당 안됨

Teledyne LeCroy ZS Series High Impedance Active Probes


The Teledyne LeCroy ZS Series of easy-to-use probes provide high impedance along with an extensive set of probe tips and ground accessories to handle wide-ranging probing scenarios. The high 1 MΩ input resistance and low 0.9 pF (0.6 pF with ZS4000) input capacitance means these probes are excellent for all frequencies.

The ZS Series probes provide full system bandwidth with all Teledyne LeCroy oscilloscopes featuring bandwidths of 4 GHz and lower. Small form combines with an extensive standard range of tip accessories to facilitate use in challenging situations as well as in probing test points spaced apart.

Features and Benefits


  • High signal fidelity to 4 GHz bandwidth

  • Low circuit loading – high input impedance and low capacitance

  • Choice of 4 GHz, 2.5 GHz and 1 GHz models

  • 1 MΩ input resistance

  • 0.6 pF (4 GHz) and 0.9 pF input capacitance

  • ± 8 V input dynamic range, ± 12 V offset range

  • Integrated with oscilloscope (ProBus interface for control from oscilloscope front panel)

  • Wide variety of tips and grounds included

    • Applications


  • Automotive

  • Power applications

  • Motor drive development

  • Product design applications

    • Note

    The ZS1000 is ideal for 200 → 600 MHz oscilloscopes

    Supplied with

    Square pin adapter, IC tip, bent tip, channel ID clips (set of 4 colours), copper tape pad (x2), freehand probe holder, ground blade (narrow), ground blade (wide), micro-grabber (pair), offset ground-Z lead, pogo ground lead, pogo tip, probe tip - standard (x3), right angle lead (long), right angle lead (short), right angle socket, straight pin lead (long), straight pin lead (short), Y-lead adapter

    관련된 링크들