Fluke Networks IntelliTone™ Pro 200 LAN Toner Cable Tester
- RS 제품 번호:
- 831-9009
- 제조사 부품 번호:
- MT-8200-61-TNR
- 제조업체:
- Fluke Networks
Subtotal (1 unit)*
₩389,216.40
제한된 재고
- 4 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩389,216.40 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 831-9009
- 제조사 부품 번호:
- MT-8200-61-TNR
- 제조업체:
- Fluke Networks
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Fluke Networks | |
| Equipment Type | Cable Tester | |
| Product Type | Network Tester | |
| LAN Category | Cat5e, Cat3, Cat6 | |
| Model Number | IntelliTone™ Pro 200 LAN Toner | |
| Tone | Yes | |
| Power Source | Battery | |
| Battery Type | PP3 | |
| Battery Life | 20h | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 40°C | |
| Width | 75 mm | |
| Standards/Approvals | EN 61326-1 | |
| Height | 32mm | |
| Length | 141mm | |
| 모두 선택 | ||
|---|---|---|
브랜드 Fluke Networks | ||
Equipment Type Cable Tester | ||
Product Type Network Tester | ||
LAN Category Cat5e, Cat3, Cat6 | ||
Model Number IntelliTone™ Pro 200 LAN Toner | ||
Tone Yes | ||
Power Source Battery | ||
Battery Type PP3 | ||
Battery Life 20h | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 40°C | ||
Width 75 mm | ||
Standards/Approvals EN 61326-1 | ||
Height 32mm | ||
Length 141mm | ||
비준수
- COO (Country of Origin):
- MY
IntelliTone Pro 200 Lan Toner
The IntelliTone Pro 200 LAN Toner is a digital and analog tone generator that verifies and troubleshoots virtually any copper cabling in datacom and telecom networks.
The IntelliTone Pro 200 LAN Toner generates IntelliTone digital signals that minimize the effect of signal bleed for locating high-grade data cabling (Cat 5e/6/6a) on active networks, and generates 500 to 1200 Hz analog signals with four distinct SmartTone songs for isolating individual wire pairs and locating voice, audio, and video cabling (Cat 3 and below) on inactive networks
Provides robust toning into active network equipment while eliminating cable misidentification due to bleed
Banana jacks allow you to use only the leads you need and facilitates easy replacement
Supports all VDV cable types (RJ45, RJ11, coax, and bare wire)
Test cable continuity, eliminating need for separate diagnostic tool
Precisely isolate wire pairs with built-in SmartTone analog toning
Tone active networks safely and effectively with IntelliTone digital mode
Identify resistance and if digital tone or analog tone function is operational
Identify and diagnose Ethernet link connectivity with NIC/hub indication
Cable termination indicator identifies if cable is connected or not
Knob provides simple, task oriented operation
Supplied with
Coax F Connector Cables, RJ11 patch cable, RJ45 patch cable, Test leads with alligator clips, Lanyard, Quick Start Guide, 9V Battery.
관련된 링크들
- Fluke Networks IntelliTone™ Pro 200 Cable Tester
- Fluke Networks IntelliTone 100 Probe
- Fluke Networks IntelliTone 200 Probe
- Fluke Networks MICROMAPPER Cable Tester RJ11, RJ45
- Fluke T140, LCD, LED Continuity Checker, 690V ac/dc, Continuity Check, Battery Powered, CAT IV 600 V
- Fluke Networks SimpliFiber Pro Optical Power Meter
- Fluke T130, LCD Voltage tester, 690V, Continuity Check, Battery Powered, CAT III 690V
- Fluke T110, Digital Voltage tester, 690V, Continuity Check, Battery Powered, CAT III 690V