Fluke Networks LIQ-KIT-VFL-FBRLRT Network Tester RJ45, RJ11

모든 Network Testers 열람하기

Subtotal (1 unit)*

₩7,242,319.50

Add to Basket
수량 선택 또는 입력
재고있음
  • 3 개 단위 배송 준비 완료
  • 추가로 2026년 6월 04일 부터 4 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩7,242,319.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
282-2368
제조사 부품 번호:
LIQ-KIT-VFL-FBRLRT
제조업체:
Fluke Networks
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Fluke Networks

Equipment Type

Network Tester

Product Type

Network Cable Tester

Connector Type

RJ45, RJ11

Tone

Yes

Model Number

LIQ-KIT-VFL-FBRLRT

Power Source

Battery

Battery Type

Lithium-ion

Battery Life

8h

Display Type

Capacitive Touch Display

Minimum Operating Temperature

0°C

Maximum Operating Temperature

45°C

Standards/Approvals

IEEE 802.3

Weight

624g

Length

8.5in

Width

4.5in

Plug Type

RJ45

COO (Country of Origin):
CN

Fluke Network Cable Tester, 8h Battery Life, 624g Weight - LIQ-KIT-VFL-FBRLRT


This network cable tester verifies copper cabling performance and diagnoses connectivity issues in Ethernet environments up to 10Gb/s. It combines cable qualification, wiremap and distance-to-fault measurements with Active network diagnostics and PoE assessment to support on-site installation and troubleshooting across industrial and commercial networks.

Features & Benefits


• Frequency-based bandwidth test indicates pass or fail up to 10Gb/s
• Length and fault location measurement identifies opens and shorts
• PoE load test measures delivered power and loaded voltage
• Nearest-switch diagnostics reveal switch name, IP and port number
• Stores up to 1000 test results for later documentation export
• USB-C charging and data transfer with rechargeable lithium-ion battery

**Applications**


• Suitable for commissioning 10GBASE-T and 5G/2.5G links in data centres
• Ideal for validating PoE availability for security cameras and APs
• Used for locating miswired or split pairs in structured cabling installs
• Can be used for network troubleshooting with ping and VLAN checks
• Suitable for technicians documenting site results via LinkWare PC

How long will a single charge last during typical field use?


The internal lithium-ion cell provides around 8 hours of operation under normal conditions.

Which connector types can be tested and located with tones?


The unit accepts and tones standard modular ports for RJ45 and RJ11 cabling.

How does the tester verify network-level connectivity?


It supports IPv4 and IPv6 ping tests, DHCP or static addressing, and reports response times Plus DNS and gateway reachability.

What environmental range is acceptable for field operation?


It is designed to operate between 0°C and 45°C and tolerate up to 90% relative humidity at lower temperatures.

How are test records exported for reporting?


Saved results are transferable via USB-C to LinkWare PC for PDF report generation.

관련된 링크들