RS PRO Handheld Digital Multimeter

모든 Multimeters 열람하기

Subtotal (1 kit)*

₩194,523.60

Add to Basket
수량 선택 또는 입력
재고있음
  • 29 개 단위 배송 준비 완료
  • 추가로 2026년 2월 11일 부터 2 개 단위 배송
  • 추가로 2026년 2월 12일 부터 155 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
Kit(s)
Per Kit
1 +₩194,523.60

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
123-1005
제조업체:
RS PRO
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

RS PRO

Multimeter Type

Handheld

Product Type

Multimeter

Display Type

Digital

Functions Measured

AC Voltage, DC Current, AC Current, Diode, DC Voltage, Continuity, Resistance

Maximum DC Voltage Measurement

600V

True RMS

No

Power Source

Battery

Minimum Operating Temperature

0°C

Maximum Operating Temperature

30°C

Standards/Approvals

No

Weight

550g

Height

192mm

Width

95 mm

Length

50mm

Safety Category Level

CAT II, CAT III

Safety Category Voltage

1000V

Battery Type

AAA

COO (Country of Origin):
TW

RS PRO IDM93N Multimeter with Advanced Test Lead Set


Save money when you buy the IDM 93N Digital Multimeter and the Advanced Test Lead Set together in this great value bundle.

IDM93N Digital Multimeter with high performance designed for harsh environments. Fully fuse protected instrument which meets the latest IEC1010-1 (safety standards) installation category III 300 V, installation category II 600 V. This is a handheld device which can measure capacitance, voltage, electrical current and resistance with diode and continuity check. This meter has an LCD display where the measurement readouts can be viewed. The rugged body guarantees drop prof resistance from up to 1.5 m. Featuring fuse protection on both 200 mA and 10 A current ranges. This device has been designed for the most demanding users that value solid construction and highly accurate measurements.

IDM93N Features and Benefits:


Shockproof (5 feet)

Auto power off

Resistance continuity beeper & diode test

Capacitance to 200 μF

200 kHz frequency counter

Large 20 mm digit contrast display

2000 display count

Batteries?


  • 150 hours (Alkaline)

  • Two 1.5V Alkaline type AAA batteries

  • Low battery indicator

  • Auto power off – approx. 30 minutes after last operation

    • Test Lead Set supplied in a blister pack that provides a range of accessories suitable for many measurement applications. Kit contains: 2 x 1.2 m silicone rubber leads terminated with one 4 mm shrouded right angle plug and one 4 mm shrouded straight plug, 2 x plug in multimeter probes, 2 x spring loaded grabber hooks and 2 x crocodile clips.

    What does it measure?


  • DC and AC Voltages - up to 600 V

  • DC/AC Current - up to 10A

  • Resistance and continuity tester - up to 20 MΩ

  • Diode - open circuit voltage up to 3.2V

    • Advanced Test Lead Set


    Test Lead Set supplied in a blister pack that provides a range of accessories suitable for many measurement applications.

    Kit contains:

  • 2 x 1.2 m silicone rubber leads terminated with one 4 mm shrouded right angle plug and one 4 mm shrouded straight plug

  • 2 x plug in multimeter probes

  • 2 x spring loaded grabber hooks

  • 2 x crocodile clips

    • Typical Applications:


    A digital multimeter (DMM) is a handy test tool that measures electrical values such as voltage, current, and resistance. A DMM is used by technicians in the following areas:

    Electrical and electronic industries

    Safety guidelines


    When using any electrical test equipment, it is advised that you refer to the user’s manual for proper working operating procedures and safety precautions to avoid potential safety hazards.

    ISO-TECH


    관련된 링크들