Fluke TL222 Silicone Test Lead Set, CAT IV, CAT III, 10A

Need a way to link digital devices to your electrical equipment? Choose these multimeter leads from FLUKE for the job. A long lead length of 1.5m makes long-distance connections between components a breeze and means you're not tied down by limited movement. The leads are designed with SureGrip technology to prevent slippery conditions from taking measurements out of your grasp. Each head is shaped at a right angle to provide strain relief and avoid frayed ends driving you around the bend.

• Rated for safe use at 1000V and 600V for high-power applications

• Energy services

These units have a current rating of 10A for use with medium-duty applications.

Banana plugs offer a way to connect electrical units without tools. They plug in by hand to your desired component and hold it securely, thanks to the spring-mounted fin that raises up once in a compatible socket.

Brought to you by Fluke, a range of Test leads and probes, suitable exclusively for Fluke Multimeters. Whether it's a test lead set or a probe set, dependent on the application, both types will add a sense of reliability to the intended application. All models are highly reliable and excellent quality.

• Both test leads and probes available

These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.

Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.

1000 V CAT III, 600 V CAT IV