제조사부품번호

Fluke TL175 HV Test Lead, CAT IV, CAT III, CAT II, 10A

RS 제품 번호:: 191-782
제조사 부품 번호:: TL175 HV
제조업체:: Fluke

Fluke TL175 HV Test Lead, CAT IV, CAT III, CAT II, 10A

Subtotal (1 unit)*

₩95,560.00

163 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩95,560.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 191-782
제조사 부품 번호:: TL175 HV
제조업체:: Fluke

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Fluke
	Lead Type	Test Lead
	Product Type	Multimeter Test Lead
	Connector Type	4 mm Banana Male
	Current	10A
	Fused	No
	Lead Length	1.5m
	Safety Category Voltage	1500V
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	60°C
	Safety Category Level	CAT IV, CAT III, CAT II
	Standards/Approvals	ETL (AMER and EMEA), CSA (APAC), IEC 617301, UK CA, CE, IEC 610102032, IEC 6132622, IEC 613261

	모두 선택
	브랜드 Fluke
	Lead Type Test Lead
	Product Type Multimeter Test Lead
	Connector Type 4 mm Banana Male
	Current 10A
	Fused No
	Lead Length 1.5m
	Safety Category Voltage 1500V
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 60°C
	Safety Category Level CAT IV, CAT III, CAT II
	Standards/Approvals ETL (AMER and EMEA), CSA (APAC), IEC 617301, UK CA, CE, IEC 610102032, IEC 6132622, IEC 613261

Datasheet - TL175 HV

COO (Country of Origin):: HK

Fluke Multimeter Test Lead, 1.5m Lead Length, 10A Current - TL175 HV

This multimeter test lead is a purpose-built electrical probe set for measuring and diagnosing high-voltage systems and general electrical circuits. It connects to compatible instrumentation via 4mm banana male connectors and is intended for professional use in environments that demand elevated safety margins and defined temperature performance.

Features and Benefits:

• Rated for 1500V to enable high-voltage measurement capability
• Conforms to CAT IV, CAT III, CAT II for multi-tier safety usage
• 10A current capacity supports typical clamp and meter ranges
• 1.5m lead length offers extended reach for panel work
• Operates between -20 °C and +55 °C for varied site conditions
• Unfused design allows use with external fuse protection systems

Applications

• Suitable for high-voltage distribution panel testing
• Ideal for industrial plant commissioning and maintenance
• Used with laboratory multimeters for component verification
• Can be used for service checks on CAT IV-rated installations
• Suitable for field diagnostics across temperature extremes

What connector type ensures compatibility with standard test equipment?

It uses 4mm banana male connectors which fit common multimeter and bench instrument sockets.

Which approvals and standards does it meet for international use?

The leads carry ETL, CE and CSA approvals and comply with relevant IEC specifications.

How should the unfused leads be used to maintain circuit protection?

They are intended to be paired with meters or external circuitry that provide appropriate overcurrent protection since the leads themselves have no internal fuse.

Are these leads suitable for the highest installation safety categories?

They are rated to CAT IV as well as CAT III and CAT II, aligning them with installations requiring the strictest transient protection.