Fluke 1664FC Multifunction Tester 1000V Earth Resistance Measurement With USB

모든 Multifunction Testers 열람하기

Subtotal (1 unit)*

₩4,479,969.00

Add to Basket
수량 선택 또는 입력
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량
한팩당
1 +₩4,479,969.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
117-6667
Distrelec 제품 번호:
300-60-476
제조사 부품 번호:
FLK-1664FC SCH
제조업체:
Fluke
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Fluke

Loop Impedance Test Type

Phase to Neutral, Phase to Earth

Product Type

Multifunction Tester

Automatic RCD Test

Yes

Model Number

1664FC

RCD Ramp Test

Yes

Insulation Test Voltage

1000V

Maximum Voltage Measurement

500V ac/dc

Test Type

Multifunction Installation Tester

Earth Resistance Measurement

Yes

Downloadable Data

Yes

Interface Type

USB

Continuity Test Current

1mA

RCD Test Type

Type S, Type G, AC

Width

250mm

Length

100mm

Remote Switch Mode

Yes

Height

125mm

Weight

1.3kg

Standards/Approvals

CSA, UL 61010, ANSI/ISAs82.02.01 2000, CE, EN 610101 Ed 2.0 (200102)

IP Rating

IP40

Test Standards

EN 61557-1, EN 61557-7, EN 61557-10

Safety Category Level

CAT III, CAT IV

Minimum Operating Temperature

-10°C

Maximum Operating Temperature

40°C

Display Type

LCD

Power Source

Battery

Safety Category Voltage

500, 300V

Battery Type

AA

제외

COO (Country of Origin):
GB

Fluke Multifunction Tester, 500V Maximum Voltage Measurement, 1000V Insulation Test Voltage - FLK-1664FC SCH


This multifunction tester is a portable instrument for verifying electrical installations and protective devices across industrial and commercial environments. It combines insulation, continuity, loop impedance and RCD testing with live data transfer to mobile devices, enabling on-site measurement capture and reporting while working to national installation practices.

Features & Benefits


• Insulation test up to 1000V protects connected equipment from damage
• Continuity test current of 1 mA allows safe motor winding checks
• Loop impedance phase to NEUTRAL tester provides Rapid ZI and PSC readings
• RCD ramp test meter Fluke supports VAR mode for EV/DC RCDs
• Earth resistance measurement tester outputs 25V at 128 Hz for RE checks
• Downloadable data USB tester syncs results to smartphone/cloud

**Applications**


• Suitable for commissioning domestic and commercial distribution boards
• Ideal for testing EV charging DC protection and 6 mA monitors
• Used for maintenance diagnostics on motor windings and circuits
• Can be used for field data collection and report generation via cloud
• Used with site acceptance procedures requiring RCD trip and timing checks

What power source does it use and how many cells are required?


It runs on six AA batteries, enabling field use without mains power.

Which overvoltage categories does it meet for safe measurement environments?


It is rated for CAT III at 500V and CAT IV at 300V for site testing.

How does it handle non‑trip RCD loop tests for Faster readings?


It offers a high‑current loop mode and a Z‑max memory to capture Peak loop values without tripping protective devices.

Can it measure prospective fault current and how is that calculated?


It computes PEFC or PSC by dividing measured mains voltage by loop or line resistance and displays the Value in amps.

What interfaces are available for exporting results and remote control?


It includes a USB Interface for data download and a remote probe/lead for switch‑mode operation.

관련된 링크들