Eaton XDP DOL Starter, DOL, 230V ac, 11 kW, 3 Phase, IP55
- RS 제품 번호:
- 528-7640
- 제조사 부품 번호:
- 118520 XDP11/ST(230V50HZ,240V60HZ)
- 제조업체:
- Eaton
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
Subtotal (1 unit)*
₩1,013,400.00
제조사가 재고 비축중
- 2026년 10월 20일 부터 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩1,013,400.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 528-7640
- 제조사 부품 번호:
- 118520 XDP11/ST(230V50HZ,240V60HZ)
- 제조업체:
- Eaton
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Eaton | |
| Product Type | DOL Starter | |
| Power Rating | 11kW | |
| Sub Type | DOL | |
| Number of Phases | 3 | |
| IP Rating | IP55 | |
| Mount Type | Surface | |
| Number of Poles | 3 | |
| Overall Length | 184mm | |
| Maximum Voltage | 230V ac | |
| Standards/Approvals | No | |
| Hazardous Area Certification | No | |
| Overall Width | 184mm | |
| Overall Depth | 184mm | |
| Series | XDP | |
| 모두 선택 | ||
|---|---|---|
브랜드 Eaton | ||
Product Type DOL Starter | ||
Power Rating 11kW | ||
Sub Type DOL | ||
Number of Phases 3 | ||
IP Rating IP55 | ||
Mount Type Surface | ||
Number of Poles 3 | ||
Overall Length 184mm | ||
Maximum Voltage 230V ac | ||
Standards/Approvals No | ||
Hazardous Area Certification No | ||
Overall Width 184mm | ||
Overall Depth 184mm | ||
Series XDP | ||
제외
D.O.L - Steel Enclosure
IP55 sheet steel enclosed starter complete with isolator for DOL applications to comply with IEE Regulations, 16th Edition on Isolation and Switching. AC-3 rated triple pole contactor with IP20 terminals and triple pole AC-3 rated switch disconnector with IP20 terminals fitted as standard. The disconnector has provision for up to 3 padlocks. The mushroom headed 'Stop' pushbutton is IP65 with the 'Start' pushbutton having an IP65 flush operator, both have IP20 terminals. Manufactured using readily available Eaton components which comply with the following specifications: isolator: IEC 943-3, pushbuttons: IEC 947-5-1, contactor: IEC 947-4-1. The enclosure is pre-wired to accept the Eaton Z00 or ZB thermal overloads which offer single phasing sensitivity to IEC 947-4. DOL starters comprise of an enclosure, switch disconnector, stop and start pushbuttons and a contactor.
Overload relay is not supplied and must be ordered separately
Fitted with 4x20mm and 2x25mm knockouts
H184 x W184 x D184mm
Note
FLC figures quoted are maximum, other overload ratings can be used dependent on FLC rating.
관련된 링크들
- Eaton XDP DOL Starter, DOL, 230V ac, 4 kW, 3 Phase, IP55
- Eaton XDP DOL Starter, DOL, 400V ac, 11 kW, 3 Phase, IP55
- Eaton XDP DOL Starter, DOL, 230V ac, 5.5 kW, 3 Phase, IP55
- Eaton XDP DOL Starter, DOL, 230V ac, 7.5 kW, 3 Phase, IP55
- Eaton XDP DOL Starter, DOL, 400V, 4 kW, 3 Phase, IP55
- Eaton XDP DOL Starter, DOL, 400V ac, 7.5 kW, 3 Phase, IP55
- Eaton XDP DOL Starter, DOL, 400V ac, 5.5 kW, 3 Phase, IP55
- Eaton XDP DOL Starter, DOL, 230V ac, 4 kW, 3 Phase, IP65