Schneider Electric U-Line Starter, 690V, 15 kW, 3 Phase, IP20, IP40

모든 Motor Starters 열람하기

Subtotal (1 unit)*

₩499,900.00

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 10월 09일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩499,900.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
493-8864
Distrelec 제품 번호:
136-22-687
제조사 부품 번호:
LUB32
제조업체:
Schneider Electric
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Schneider Electric

Product Type

Starter

Power Rating

15kW

Number of Phases

3

Current Rating

32A

Mount Type

DIN Rail

IP Rating

IP20, IP40

Number of Poles

3

Overall Length

145mm

Maximum Voltage

690V

Overall Width

45mm

Standards/Approvals

CSA, IEC, UL

Hazardous Area Certification

ATEX

Overall Depth

126mm

Series

U-Line

제외

COO (Country of Origin):
FR

Schneider Electric Power Base, 50A Breaking Capacity, 6kV Rated Impulse Withstand Voltage - U-Line Series - LUB32


Get your industrial motor off to a solid start with this power base from Schneider Electric. It works with DOL starters in the LUC range (such as 272-527) to deliver the safe supply of energy your engine needs to run smoothly. Thanks to its 32A current rating, this unit handles heavy-duty applications with ease. Its modular design means you can integrate it with other devices on your circuit for advanced control and protection. You can either clip this flexible component directly onto your DIN rail or fasten it to a mounting plate.

Features & Benefits


• Low weight of 900g for easy handling and minimal strain

• Mechanical durability of 15 million operating cycles, so you can count on a long-term performance

• Rated impulse withstand voltage of 6kV means it handles high power surges without breaking a sweat

• Compact dimensions of 154 (H) x 45 (W) x 126mm (D) for space-efficient installation in tight setups

Applications


• Automotive industry

• Conveyor systems

• Oil and gas plants

Is this power base energy-efficient?


Yes. With a power rating of 15kW, this unit loses just 3W to heat, so it's energy-saving.

Schneider Electric Power Base - U-Line Series


Schneider Electric power bases are one of two basic units that are required every when used in conjunction with a control unit. This type of power base is independent of the control voltage motor power, it also incorporates the braking function.

Features & Benefits


  • Each power base within this range is independent of the control voltage and of the motor power

  • Incorporates the braking function with a breaking capacity of 50 kA at 400 V

  • Total co-ordination (continuity of service) and switching function

  • Offers users short circuit protection, dramatically impacting downtime of machines

  • Padlockable

  • Disconnection/isolation

  • Two auxiliary contacts (1NO+1NC) which indicate the open or closed position of the power contacts

  • Each powerbase is 45mm wide

  • Forms part of Schneider Electrics TeSys range of products

    • Schneider Electric TeSys U


    The TeSys U is a modular system for motor control; it enables the user to create a customised solution for their control requirements, from a series of standard modules. The plug-in modules allow the assembly and wiring before the selection of motor protection parameters and control voltages, they can be created or changed in seconds by changing the plug-in modules. A host of DOL starting applications can be catered for.

  • Faster design with fewer components needed

  • Quicker panel build with faster assembly time and fewer wires per starter

  • Space saving 45mm width up to 32A (even for reversing) allowing smaller panels

  • Flexible and upgradeable with plug-and-play function modules

  • Voltage and protection parameters can be determined after assembly and wiring

  • Broad band electronic control unit provides improved overload protection with fewer components

  • Expandable plug-and–play diagnostics

  • Total co-ordination for fast return to service after a short circuit fault

    • Tesys model U is easy to select:


    First choose a Power Base- 12A or 32A, direct on line or reversing. The power base includes 2 auxiliary contacts.

    Then choose the plug-in protection module by motor full load current and control voltage required.

    Additional plug in functions can be selected and added at any time.

    The plug-in bases can use any LU9 type blocks see stock no. 493-8779 for base option

    Note

    Current shown is when at a voltage of 440V is utilised. LUB**** series power bases are non-reversing, LU2B**** series are reversing types.

    Warning

    Schneider are in the process of amending the colour of the TeSys range, from White to Black. This means that the stock you receive could be either of these colours. Please be assured that the colour change in no way affects the Fit, Form or Function of the product.

    관련된 링크들