Toshiba, Brushed DC Motor DC Motor Driver 48-Pin, VQFN

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Motor Driver ICs 열람하기
현재 비가용
RS는 이 제품을 더 이상 판매하지 않습니다.
RS 제품 번호:
214-8073
제조사 부품 번호:
TB67H420FTG(O,EL)
제조업체:
Toshiba
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Toshiba

Motor Type

Brushed DC Motor

Product Type

DC Motor Driver

Configuration

Dual

Mount Type

Surface

Package Type

VQFN

Output Current

9A

Pin Count

48

Minimum Supply Voltage

10V

Maximum Supply Voltage

47V

Minimum Operating Temperature

-20°C

Maximum Operating Temperature

85°C

Length

7mm

Standards/Approvals

RoHS

Height

1mm

Series

TB67H420FTG

Automotive Standard

No

The Toshiba brushed DC motor driver has sense resistor less current control. The internal H-bridge can be controlled independently, as a two brushed DC motor driver or a single stepping motor driver using the dual H-bridge mode. This IC is fabricated with the BiCD process and is rated at 50 V, 9.0 A

Supporting large current (9.0 A) and high voltage (50 V) brushed DC motor operation

Capable of driving two brushed DC motors using dual H-Bridge mode

Capable of driving one stepping motor using dual H-bridge mode

Built-in sense resistor less current control. (ACDS: Advanced Current Detection System)

Low Rds (on) MOSFETs (High side+ Low side=0.33 Ω (typ.))

Error detection features (Thermal shutdown (TSD), Over current detection (ISD), Power-on-reset (POR), and Motor load open detection (OPD))

Error detection signal output (Error Output)

Internal VCC (5 V) regulator enables the driver to be operated with a single power supply (VM)

Adjustable constant current PWM frequency using external components

Small package with thermal pad. (QFN48: 7.0 mm x 7.0 mm)

관련된 링크들