onsemi NCV7719DQAR2G, DC Motor Motor Driver IC 24-Pin, SSOP
- RS 제품 번호:
- 189-0446P
- 제조사 부품 번호:
- NCV7719DQAR2G
- 제조업체:
- onsemi
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 기용 가능
View bulk pricing optionsSubtotal 626 units (supplied on a reel)*
₩4,300,620.00
일시적 품절
- 2026년 9월 14일 부터 898 개 단위 배송
- 추가로 2027년 1월 13일 부터 2,500 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 626 - 1248 | ₩6,870.00 |
| 1250 + | ₩6,760.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 189-0446P
- 제조사 부품 번호:
- NCV7719DQAR2G
- 제조업체:
- onsemi
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | onsemi | |
| Product Type | Motor Driver IC | |
| Motor Type | DC Motor | |
| Configuration | SD Card | |
| Mount Type | Surface | |
| Package Type | SSOP | |
| Output Current | 550mA | |
| Pin Count | 24 | |
| Maximum Supply Voltage | 5.25V | |
| Minimum Supply Voltage | 3.15V | |
| Typical Switching Frequency | 5MHz | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Standards/Approvals | PPAP, AEC-Q100 | |
| Width | 3.9mm | |
| Length | 8.64mm | |
| Height | 1.65mm | |
| Series | NCV7719 | |
| Automotive Standard | AEC-Q100 | |
| Supply Current | 2.5mA | |
| 모두 선택 | ||
|---|---|---|
브랜드 onsemi | ||
Product Type Motor Driver IC | ||
Motor Type DC Motor | ||
Configuration SD Card | ||
Mount Type Surface | ||
Package Type SSOP | ||
Output Current 550mA | ||
Pin Count 24 | ||
Maximum Supply Voltage 5.25V | ||
Minimum Supply Voltage 3.15V | ||
Typical Switching Frequency 5MHz | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Standards/Approvals PPAP, AEC-Q100 | ||
Width 3.9mm | ||
Length 8.64mm | ||
Height 1.65mm | ||
Series NCV7719 | ||
Automotive Standard AEC-Q100 | ||
Supply Current 2.5mA | ||
- COO (Country of Origin):
- PH
The NCV7719 Octal is an eight channel half-bridge driver with protection features designed specifically for automotive and industrial motion control applications. The product has independent controls and diagnostics, and the drivers can be operated in forward, reverse, brake, and high impedance states. The device is controlled via a 16 bit SPI interface and is daisy chain compatible.
Low Quiescent Current Sleep Mode
High Side and Low Side Drivers Connected in a Half Bridge Configuration
Integrated Freewheeling Protection (LS and HS)
0.55 A Peak Current
RDS(on) = 1 ohm (typ)
5 MHz SPI Control
Compliance with 5 V and 3. 3 V Systems
Undervoltage and Overvoltage Lockout
Overcurrent Protection, Overtemperature Protection
Under Load Detection
Discriminated Fault Reporting
16Bit Frame Detection
Daisy Chain Compatible with Multiple of 8 bit Devices
Applications
Automotive
Industrial
DC Motor Management for HVAC Application
관련된 링크들
- RS PRO Steel Perforated DIN Rail, Top Hat Compatible, 500mm x 35mm x 7.5mm
- 6EP3334-8SB00-0AY0 | Siemens SITOP PSU8200 Switched Mode DIN Rail Power Supply, 120 → 230V ac ac Input, 24V dc dc Output, 10A Output,
- H3CR-A8 AC24-48/DC12-48 | Omron H3CR Series DIN Rail, Panel Mount Timer Relay, 12 → 48 V dc, 24 → 48V ac, 2-Contact, 0.05 s
- 52104571 | Lapp Cable Gland Adaptor, M20 Exterior Thread, M16 Interior Thread, Nickel Plated Brass, SKINDICHT Series
- 515015-601 | Latching Push Button Switch, IP67, Panel Mount
- Fluke LVD2 Non Contact Voltage Detector
- BD-02PMMS-LC7001 | Amphenol Industrial Circular Connector, 2 Contacts, Panel Mount, Plug, Male, IP67, Ceres Series
- RS PRO Type K Thermocouple 2m Length, 0.3mm Diameter → +600°C
