onsemi NCV7708FDWR2G, DC Motor Motor Driver IC 28-Pin, SOIC

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Motor Driver ICs 열람하기
현재 비가용
죄송합니다. 언제 재입고될지 모릅니다.
포장 옵션
RS 제품 번호:
186-1471
제조사 부품 번호:
NCV7708FDWR2G
제조업체:
onsemi
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

onsemi

Motor Type

DC Motor

Product Type

Motor Driver IC

Configuration

Half Bridge

Mount Type

Surface

Package Type

SOIC

Pin Count

28

Output Current

500mA

Minimum Supply Voltage

3.15V

Maximum Supply Voltage

5.25V

Typical Switching Frequency

5MHz

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

150°C

Height

2.36mm

Length

18.05mm

Standards/Approvals

No

Series

NCV7708

Automotive Standard

AEC-Q100

Supply Current

3mA

The NCV7708F is a fully protected Hex−Half Bridge−Driver designed specifically for automotive and industrial motion control applications. The six low and high side drivers are freely configurable and can be controlled separately. This allows for high side, low side, and H−Bridge control. H−Bridge control provides forward, reverse, brake, and high impedance states. The drivers are controlled via a standard SPI interface.

Ultra Low Quiescent Current Sleep Mode

Six Independent High−Side and Six independent Low−Side Drivers

Integrated Freewheeling Protection (LS and HS)

Internal Upper and Lower Clamp Diodes

Configurable as H−Bridge Drivers

RDS(on) = 0.6 Ω (typ)

5 MHz SPI Control

SPI Valid Frame Detection

Compliance with 5 V and 3.3 V Systems

Over- and undervoltage Lockout

Fault Reporting

Current Limit

Overtemperature Protection

Internally Fused Lead in SOIC−28 Packaged for Better Thermal Performance

SSOP-24 NB EPAD

Applications

Automotive

Industrial

DC Motor Management

End Products

HVAC

관련된 링크들