onsemi MC33035DWG, Brushless Brushless DC Motor Controller, 40 V 24-Pin, SOIC
- RS 제품 번호:
- 464-053P
- 제조사 부품 번호:
- MC33035DWG
- 제조업체:
- onsemi
본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.
대량 구매 할인 받기
15개 더 담고 ₩2,400.00 할인 받기
View bulk pricing optionsSubtotal 8 units (supplied in a tube)*
₩77,120.00
재고있음
- 47 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 절감 |
|---|---|---|
| 8 - 14 | ₩9,640.00 | - |
| 15 + | ₩9,480.00 | ₩2,400.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 464-053P
- 제조사 부품 번호:
- MC33035DWG
- 제조업체:
- onsemi
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | onsemi | |
| Motor Type | Brushless | |
| Product Type | Brushless DC Motor Controller | |
| Configuration | 3 Phase | |
| Maximum Collector Emitter Voltage Vceo | 40V | |
| Mount Type | Surface | |
| Package Type | SOIC | |
| Pin Count | 24 | |
| Maximum Supply Voltage | 30V | |
| Minimum Supply Voltage | 10V | |
| Minimum Operating Temperature | -40°C | |
| Typical Switching Frequency | 28kHz | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | No | |
| Width | 7.6mm | |
| Series | MC33035 | |
| Length | 15.54mm | |
| Height | 2.36mm | |
| Inverter Power Rating | 650mW | |
| Automotive Standard | AEC-Q100 | |
| Supply Current | 10mA | |
| 모두 선택 | ||
|---|---|---|
브랜드 onsemi | ||
Motor Type Brushless | ||
Product Type Brushless DC Motor Controller | ||
Configuration 3 Phase | ||
Maximum Collector Emitter Voltage Vceo 40V | ||
Mount Type Surface | ||
Package Type SOIC | ||
Pin Count 24 | ||
Maximum Supply Voltage 30V | ||
Minimum Supply Voltage 10V | ||
Minimum Operating Temperature -40°C | ||
Typical Switching Frequency 28kHz | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals No | ||
Width 7.6mm | ||
Series MC33035 | ||
Length 15.54mm | ||
Height 2.36mm | ||
Inverter Power Rating 650mW | ||
Automotive Standard AEC-Q100 | ||
Supply Current 10mA | ||
The ON Semiconductor MC33035DWG is a brushless DC motor controller from the MC33035 series. This monolithic brushless DC motor controller device offers high performance alongside several protective features.
The MC33035DWG BLDC motor controller contains all of the necessary functionality to create a full-featured open loop, three or four phase motor control system. Commutation sequencing is a process in which motion is generating from switching current in phases. This is MADE possible by a built-in rotor position decoder. The MC33035DWG also contains a temperature compensated reference which can supply sensor power, a frequency programmable sawtooth oscillator, 3 open collector TOP drivers and 3 high-current totem pole bottom driver. This is Ideal for driving power MOSFET devices.
Protective Features:
• Undervoltage lockout
• Cycle-by-cycle current limiting
• Selectable time-delayed latched shutdown mode
• Internal thermal shutdown
• Unique fault output
Other Features:
• SOIC-24 package
• 10-30V operation
• 6.25V reference for supplying sensor power
• 60/300° or 120/240º sensor phasings
• Can control BLDC motors with external MOSFET Half-bridge
Versions Available:
464-053 - single
125-0025 - tube of 30
Motor Controllers & Drivers, ON Semiconductor
관련된 링크들
- H3CR-A8 AC24-48/DC12-48 | Omron H3CR Series DIN Rail, Panel Mount Timer Relay, 12 → 48 V dc, 24 → 48V ac, 2-Contact, 0.05 s
- RS PRO Type K Thermocouple 2m Length, 0.3mm Diameter → +600°C
- BD-02PMMS-LC7001 | Amphenol Industrial Circular Connector, 2 Contacts, Panel Mount, Plug, Male, IP67, Ceres Series
- Fluke LVD2 Non Contact Voltage Detector
- 52104571 | Lapp Cable Gland Adaptor, M20 Exterior Thread, M16 Interior Thread, Nickel Plated Brass, SKINDICHT Series
- RS PRO Steel Perforated DIN Rail, Top Hat Compatible, 500mm x 35mm x 7.5mm
- 515015-601 | Latching Push Button Switch, IP67, Panel Mount
- 6EP3334-8SB00-0AY0 | Siemens SITOP PSU8200 Switched Mode DIN Rail Power Supply, 120 → 230V ac ac Input, 24V dc dc Output, 10A Output,
