Electromen - EM-176 DC MOTOR CONTROLLER 12/24VDC, 10A

The EM-176 motor driver is a 4-quadrant DC-motor speed controller and is suitable for 12 or 24V supply. The unit utilizes a PWM driven H-bridge and achieves high efficiency and extensive controlling options.Control can be provide by a potentiometer or direct voltage signal and the drive offers adjustable load compensation, if required.An auxiliary card can be fitted to EM-176 to provide a means to apply a symmetrical (+/-) control input with either a voltage signal or potentiometer. The ramp feature is used to control the motor start up and braking rates, this is set with an on-board trim pot

The scale trimmer can be used to scale set value to correspond better the motor rpm.

The current limit can be set with either the trim pot or with a direct voltage signal, this can be adjusted to protect the motor and transmission in a jam situations

The unit has separate inputs for brake, freewheel and reverse.

The brake function shorts the motor poles to provide dynamic braking, the reverse command changes motor direction with ramp times to allow for smooth direct change

The freewheel command sets the motor free from all control, the freewheel command overrides all other commands

Features and Benefits

High efficiency drive with low RF emissions

4-quadrant control

Brake, freewheel and reverse commands

Option for symmetrical control input ±10V

Settable current limit

Settable acceleration/brake ramp

Braking options

Load compensation

Compact and DIN rail mountable;12-24Vdc, 10A continuous, 15A peak

Speed, direction and braking control

Adjustable start ramp and current limit

Compact and DIN rail mountable

EM-A1 card slot option for symmetrical control ±5V or ±10V (rev-stop-fwd)

EM-176 DC-Motor Controller

EM-176 is designed for DC-motor speed control. The unit can be used with unregulated DC supply. Motor loading can be compensated with inbuilt RxI-type adjustment.

Speed control value can be set with voltage signal or with potentiometer, there is an auxiliary voltage signal output for potentiometer use.

4 Quadrants

Braking

Freewheeling

Reversal

0 to 10V control

Optional ±10V control

Soft start ramp

Adjustable current limit

Load compensation (RxI)

High efficiency

High peak loading capacity

Rail mountable

모두 선택	제품 정보	값
	브랜드	Electromen OY
	Product Type	DC Motor Controller
	Control Function	Potentiometer
	Supply Voltage	12/35 V dc
	Output Voltage	12/24 V
	Current Rating	10 A
	Overall Length	63mm
	Overall Width	73mm
	Overall Depth	30 mm
	Minimum Operating Temperature	-20°C
	Maximum Operating Temperature	70°C
	Standards/Approvals	No
	Series	EM-176

	모두 선택
	브랜드 Electromen OY
	Product Type DC Motor Controller
	Control Function Potentiometer
	Supply Voltage 12/35 V dc
	Output Voltage 12/24 V
	Current Rating 10 A
	Overall Length 63mm
	Overall Width 73mm
	Overall Depth 30 mm
	Minimum Operating Temperature -20°C
	Maximum Operating Temperature 70°C
	Standards/Approvals No
	Series EM-176

Electromen OY DC Motor Controller, 12/35 V dc, 10 A, Potentiometer Function

Electromen - EM-176 DC MOTOR CONTROLLER 12/24VDC, 10A

Features and Benefits

EM-176 DC-Motor Controller

관련된 링크들